USER MANUAL DFCN2 NFC MOUDULE USER MANUAL & Operational description
USER MANUAL I. Introduction DFCN2 is a kind of NFC (Near Field Communication) module that could be embedded in one IT system by simply connecting the module to his target microcontroller and start developing his application software. II.
USER MANUAL III. FEATURE Contactless protocols: • ISO14443 A/B • ISO15693 • ISO18092 Contactless transmission of data and RF energy Peer-to-peer communication Card emulation NFC card reader/writer Programmable receiver sensitivity Carrier frequency: 13.56 MHz RF Field detection Single ended external antenna connection IV.
USER MANUAL VI.
USER MANUAL VII. Certifications and Regulatory Item Feature Description RF: FCC part 15C 6.1 FCC EMI: FCC part 15B FCC grant: TCB Filing fee RF: EN302291 Class B 6.2 CE EMC: EN301489-1/-3 Safety: EN 60950-1:2006/A11:2009 6.3 IC RSS-210 ISSUE 8 RSS-GEN ISSUUE 3 General: This modular approval is limited to OEM/Integrators installation only. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module.
USER MANUAL This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
USER MANUAL In the user manual of the host device, the following statements are required to be included. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.