USER MANUAL DFCN-H1 NFC MOUDULE USER MANUAL & Operational description
USER MANUAL I. Introduction DFCN-H1 is a kind of NFC (Near Field Communication) module that could be embedded in one IT system by simply connecting the module to his target microcontroller and start developing his application software. II.
USER MANUAL III. FEATURE Contactless protocols: • ISO14443 A/B • ISO15693 • ISO18092 Contactless transmission of data and RF energy Peer-to-peer communication Card emulation NFC card reader/writer Programmable receiver sensitivity Carrier frequency: 13.56 MHz RF Field detection Single ended external antenna connection IV.
USER MANUAL VI. MECHANICAL DIMENSION VII. Certifications and Regulatory Item Feature Description RF: FCC part 15C 6.1 FCC EMI: FCC part 15B FCC grant: TCB Filing fee RF: EN302291 Class B 6.2 CE EMC: EN301489-1/-3 Safety: EN 60950-1:2006/A11:2009 6.3 IC RSS-210 ISSUE 8 RSS-GEN ISSUUE 3 General: This modular approval is limited to OEM/Integrators installation only. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module.
USER MANUAL End Product Labeling (FCC) When the module is installed in the host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: “Contains FCC ID: NKR-DFCNH1”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.
USER MANUAL End Product Labeling (IC) Labeling Requirements for the Host Device (from Section 3.2.1, RSS-Gen, Issue 3, December 2010): The host device shall be properly labeled to identify the module within the host device.
USER MANUAL
