User Manual

4. Creating an Ad Hoc Network

8. In Advance tab (Ad-Hoc Mode), there are alternatives for Power

Consumption Setting, Fragmentation Threshold and RTS/CTS

Threshold.

Note! Power Consumption Setting: At “Power consumption Setting”

group, select which power save level want to be set by checking

CAM Mode, Fast Power-Saving mode or Maximum Power-Saving

mode. The default is CAM mode. If the most save mode want to use,

select the Maximum Power-Saving mode, but it throughput is lower

than CAM and Fast Power-Saving mode.

The throughput of “Fast Power-Saving mode” is better than

“Maximum Power-Saving mode”, but its power save is less than

“Maximum Power-Saving mode”.