DRCB-M1 IEEE 802.11 b/g CF WLAN Module User’s Manual V0.1 Dec.
Table of Contents Chapter 1 Functional Description ................................................... 5 1.1 Features ............................................................................. 5 1.2 Integrated Radio Transceiver ............................................. 5 1.3 Receiver Path..................................................................... 6 1.4 Transmitter Path ................................................................. 6 1.5 Calibration .......................................
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved.
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Chapter 1 Functional Description Thank you very much for purchasing this IEEE802.11b/g CF WLAN Module. This product provides the easiest way to wireless networking. This User Manual contains instructions in the operation of this product. Please keep this manual for future reference. 1.
the IEEE802.11b/g Specification. 1.3 Receiver Path This CF module has a wide dynamic range, direct conversion receiver. It employs high-order on-chip channel filtering to ensure reliable operation in the noisy 2.4-GHz ISM band. The excellent noise figure of the receiver makes an external LNA unnecessary. Leading-edge Encore DSP technology improves the receive sensitivity and extended range, that enables whole home coverage. 1.
Chapter 2 Installation Driver This driver is porting from bcm4318 1.130.35.0 with CCX source code to WinCE NDIS CF interface. This CF driver is workable in Intermec 751 PDA, and CN30 PDA. 2.1 Driver Features IEEE 802.11b/g Ad-Hoc / Infrastructure WEP 64 / 128-bit WPA-PSK / WPA2-PSK (by WZC / Funk Client) WPA / WPA2 (by WZC / Func Client) 802.1x – TLS / 802.1x – PEAP (by WZC / Funk Client) LEAP (by Funk Client) WPA-TTLS (by Funk Client) TKIP AES IEEE Power Save IEEE 802.11d 2.2 Installing the driver Step1.
