User Manual

33
4. Click OK.
5. Check the Auto Selected Profiles box.
6. Save the modified configuration file.
7. With Auto Profile Selection enabled, the wireless adapter scans for available
networks. The highest priority profile with the same SSID as a found network is
used to connect to the network. On a failed connection, the client adapter tries
with the next highest priority profile.
NOTE! When Auto Profile Selection is enabled by checking Auto Select Profiles
on the Profile Management tab, the client adapter scans for an available
network. The profile with the highest priority and the same SSID as one of
the found networks is the one that is used to connect to the network. If the
connection fails, the client adapter tries the next highest priority profile that
matches the SSID, and so on.
4.3.4 Switching Profiles
1. To switch to a different profile, go to the Profile Management tab.
2. Click on the Profile Name in the Profile List.
3. Click Activate.
4. The Profile List provides icons that specify the Operational State for that profile.
The list also provides icons that specify the Signal Strength for that profile.