User's Manual

3. Step-by-Step Installation Guide

This section will lead you through the installation of 802.11g USB 2.0 Adapter (both

software and hardware) in detail. People who are familiar with the installation and

settings of wireless device may refer to quick start guide to establish a network in a

snap.

To establish your wireless network connection, the following steps should be

executed:

1. Install the software by using the installation CD.

2. Install the 802.11g USB 2.0 Adapter.

3. Install the required network protocols to communicate with your network.

Mostly, you will need to set the TCP / IP protocol.

The product is designed to operate under Windows 98SE, ME, 2000 and XP. The

installation procedure is about the same. Please follow the installation wizard to

install the software.