User's Manual

settings. Select “Install the software automatically” when the window with this

option appears, and then click “Next” to continue installation.

4. Windows XP: Select “Install the software automatically” when the window with

this option appears, and then click “Next” to continue installation. Note that

before using the 802.11g USB2.0 WLAN Utility, please disable the Windows XP

Zero-Configuration first.

3.1.2 Disable Windows XP Zero-Configuration

In Windows XP, it is recommended that you use the 802.11g USB2.0 adapter Utility.

Right after the installation, before opening the Utility, please follow the steps below to

disable the Windows XP Zero Configuration:

1. Go to “Control Panel” and double click “Network Connections”.

2. Right-click “Wireless Network Connection” of 802.11g USB 2.0 adapter, and

select “Properties”.

3. Select Wireless Networks tab, and uncheck the check box of “Use Windows to

configure my wireless network settings”, and then click “OK”.