User's Manual

3.4 Connecting to an Infrastructure Network

1. Select the Wireless Networks tab.

2. Click Refresh button to rescan all available networks in vicinity.

3. Choose (click) one network from the list.

4. Click Configure button and then Apply button.

5. If the chosen network is Security Enabled, Wireless Network Properties window

pops up. Contact the network administrator for the encryption settings.

In the Available networks list, you might see different icons which indicates different

network modes:

: Infrastructure Mode

: Ad-hoc Mode

Note! When Encryption function enabled, all devices in the same network should

set the same WEP key.