DOCUMENT TRACKING – REMOVE THIS SECTION BEFORE FINAL PRODUCTION Date By Notes 6/27/2011 Kevin Lewis Created new version based on 1.0.2 to add US specs and FCC statement. Blue highlighting represents changes since v.1.0.2.
Gateway GW110 / GW112 GW120 / GW122 GW140 / GW142
Table of Contents Introduction Gateway Overview Installation Common Z-Wave Tasks Network Inclusion Process Network Exclusion Process Safety Information About GreenWave Product Specifications 1 2 5 10 10 12 15 17 18
Introduction The GreenWave Reality platform helps create a smart, energy-efficient home through the monitoring and controlling of your appliances and electronics (referred to as “devices”). You can conserve energy with minimal impact to your lifestyle by using our products to easily manage your devices.
Gateway Overview The GreenWave Reality Gateway provides the network connection for GreenWave Reality PowerNodes (our smart outlet adapters that connect your devices to electrical outlets). This connection enables the Gateway to securely connect the devices you have powered through PowerNodes to your energy management system and our servers, allowing you to monitor and control your devices’ power usage remotely through a Web browser or smartphone application.
2 3 4 5 1 7 6 1. Sync button: Button that syncs devices and shows current activity and status of synced devices. 2. WAN (Internet connection) error indicator: Indicator that shows whether or not the Gateway is connected to the 3. LAN (home network) error indicator: Indicator that shows whether or not the Gateway is connected to your 4. Power indicator: Indicator that shows whether or not the Gateway is powered. 5. Network socket (RJ45): Ethernet port to connect the Gateway to your network.
Indicators Your Gateway has sync and network indicators that display the following patterns and colors to show you its current status: Power indicator—off (no color): Gateway is off. Network indicator—off (no color): Gateway is connected to the network. Power indicator—steady white: Gateway is Network indicator—red: Gateway is on. not connected to the network. Check that the Gateway is Sync button—two rotating green bars: Gateway is connected to your network router.
Installation Before you install your Gateway, make sure that your home network is operating and connected to the Internet. There are four basic steps to install your Gateway: 1. Connect the Gateway to your network router. 2. Power the Gateway. 3. Verify that the Gateway is connected. 4. You are ready to install GreenWave Reality PowerNodes.
1. Connect the Gateway to Your Network Router Connect the Gateway to any available port in your home network router using the included Ethernet cable. 2. Power the Gateway Power the Gateway by plugging it into an electrical outlet using the included power adaptor. The Gateway illuminates while it is attempting to connect to the Internet. 3.
7
4. Ready to Install Your PowerNodes The GreenWave Reality PowerNode is a smart outlet adapter that connects your devices to electrical outlets and your GreenWave Reality energy management system. This connection allows you to monitor and control your devices’ power usage remotely through a Web browser or smartphone application. Your PowerNode has a corner wheel with colored numbers to represent the room or device that the PowerNode is powering.
Installation Tips Review the safety information. Be sure to review the information contained in the “Safety Information” chapter for important safety information you should follow. Keep radio signals clear. Your Gateway and PowerNodes have antennas built-in for radio communication with Internet services and other devices on your energy management system.
Common Z-Wave Tasks The Gateway combines various wireless technologies, such as Z-Wave and ZigBee, into a standard IP-based mesh home network. As a Z-Wave enabled device, the Gateway is compatible with Z-Wave enabled networks and hardware from other manufacturers. Network Inclusion Process Note: If your PowerNodes or other GreenWave Reality devices came as part of a package with your Gateway, then you can skip this section since the devices in the package were already connected at the factory.
Steps for Network Inclusion You can start the inclusion process by pressing and holding the Gateway sync button for two seconds so the rotating “inclusion mode” pattern appears on the Gateway activity indicator. When this is completed, the Gateway is ready to perform the inclusion of the other GreenWave Reality device. If you attempt to include a GreenWave Reality device from another energy management system with an “alien” Gateway, the inclusion will fail and the indicator bars will flash rapidly.
To complete the inclusion process on an In-Home Display, you must perform the following steps (refer to the user guide that came with your Display for more information): 1. Make sure you are on the JOIN NETWORK screen on the In-Home Display. 2. Press the select button on the Display to have it start the inclusion process. 3. When the Display connects successfully, the screen shows the message CONNECTED.
indicator. When this is completed, the Gateway is ready to perform the exclusion of the other GreenWave Reality device. To complete the exclusion process on a PowerNode, you must perform the following steps (refer to the user guide that came with your PowerNode for more information): 1. 2. Unplug the PowerNode from the electrical outlet. Locate the sync button on the PowerNode. It is a small round button on the side of the device, marked with the sync symbol. 3.
If the screen shows the message UNSUCCESSFUL, then the exclusion process has failed, and you must start over.
Safety Information Indoor Use Only Your Gateway should be used only in dry, indoor locations. Do not use your Gateway in high-humidity locations such as greenhouses, saunas, washrooms, or patios. Do not use your Gateway in locations where it can get wet such as near aquariums or running water. Do Not Disassemble Your Gateway has no user-serviceable parts inside. In case of persisting malfunction, please contact Customer Service to arrange for repair at a certified service location.
Arrange for Service if Needed Should you encounter any problems with your Gateway, turn the device off by unplugging it from the electrical outlet.
About GreenWave GreenWave Reality is a global innovator in the emerging Home Energy Management market. GreenWave Reality provides an affordable, easy-to-use, standards-based platform that allows utilities enhance their relationship with consumers and better balance energy on the grid while consumers can conserve energy with a minimal impact to their lifestyle by easily monitoring and controlling their appliances and adding intelligent LED lighting.
Product Specifications Model Z-Wave Radio Frequency ZigBee Frequency GW110/GW112 GW120/GW122 GW140/GW142 868.42MHz 908.42MHz 921.42MHz 2.4GHz 2.4GHz 2.
Document Version 1.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
(Back Cover)
