User's Manual
Table Of Contents
- Contact Information
- Revision History
- 1 Product Features
- 2 Pin Definitions
- 3 Electrical Specifications
- 4 Mechanical Information
- 5 Packing Information
- 6 PCB Mounting Guidelines
- 7 Regulatory and Industry Approval
- Initialisms
Product datasheet
□ Normal □ Internal Use Confidential □ Restricted Confidential 19 / 29
The RF trace between RF pads and antenna should as shorter as possible with 50ohm
characteristic impedance.
The characteristic impedance depends on the dielectric of PCB, the track width and
the ground plane spacing. Microstrip type is required. The detail simulation as below.