User's Manual

2.2 Connecting the Camera to a Network

1. After inserting the Ethernet cable into the camera’s Ethernet

port and connecting the other end to the wireless adapter, the

adapter will be able to supply power to the camera when

plugged into a wall outlet.

2. Press the WPS button of the AP that you want to connect to,

then press the adapter’s button to connect to the AP. Once the

Wi-Fi of the wireless adapter is paired with an AP via WPS, the

camera then connects to the network through the wireless

adapter.

3. The IP camera has been successfully added to your network after

the connection between the wireless adapter and your AP is

established.

The installation process is now complete. Now you may start using

the camera.