Verizon LVX1 Extender Mini User Guide Version 7
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Table of Contents Chapter 1 Introduction .......................................................................................................................... 4 1.1 Unboxing Information ................................................................................................................ 4 1.2 Key Features............................................................................................................................. 4 1.3 LEDs and Buttons ........................................
Chapter 1 Introduction This chapter includes a list of items included with the LVX1 Extender Mini, an overview of the Extender Mini’s features, and a description of the ports on the Extender Mini. 1.1 Unboxing Information Inside the product package for the LVX1 Extender Mini, you should find the following: • Wi-Fi Extender Mini 1.2 Key Features • Supports Tri-Radio Wi-Fi 802.11ac • Supports Wi-Fi Mesh • Wall-plug (US type) cordless design 1.3 LEDs and Buttons 1.
LED Light Guide Function Pairing (WPS) Wi-Fi Utility Functions Status LED Ring Not paired to the Router Soft blink Red Until state changes Pairing mode active Soft blink Blue Until pairing successful Pairing success Solid Blue on for 2 seconds Pairing failure Strong blink Red Blinks for 2 seconds The Wi-Fi extender is paired to the Router, but Wi-Fi is turned Off. Solid Amber Until Wi-Fi is turned on Poor Wi-Fi signal quality between the Router and the Wi-Fi extender.
Chapter 2 Connecting the Wi-Fi Extender Mini This section describes how to set up your Wi-Fi Extender Mini. 2.1 Setting Up the Wi-Fi Extender Mini 1. Unbox the Wi-Fi Extender Mini. 2. Plug the Extender Mini directly into an outlet so that it is vertically aligned, as shown below on the left. 3. Set up a WPS connection between the Wi-Fi Extender Mini and the 5G Home Router by pressing the WPS button on the Router first and then that of the Extender Mini.
2.2 Backup Pairing Process Should WPS Fail In case WPS fails, follow the following steps to perform paring: 1. Scan the QR code printed on the label on the back of the Wi-Fi Extender Mini and detailed information, as shown in the example below, will be displayed on a results page: SKU: LVSKX1 SN: KX196P000063 Wi-Fi Name (SSID): Verizon-5G Home-841A Wi-Fi Password: luxury-tiara-replete Administration URL: http://192.168.0.254 Password: bicarb-twine-easting 2.
Alternatively, you can enter the SSID and password manually. Click “Connect” to connect to the router. 4. The following page shows that your Wi-Fi Extender Mini is connecting to the router.
Chapter 3 Product Specifications 1. Connectivity Wi-Fi 802.11ac MU-MIMO 3.39 × 5.71 × 2.10 in., 0.44 lbs. AC Input 12V 1A Ports 1 AC Plug LEDs RGB LED Temperature (operating) 0 °C to 40 °C Package Dimensions/Weight 6.2(L) × 10.2(W) × 3.2(H) in., 0.7 lbs. Dimensions/Weight (inches, lbs.) Power (Inches, lbs.
