User's Manual
Table Of Contents
- Contact Information
- Revision History
- Contents
- 1.Introduction
- 2.Electrical Specifications
- 3.RF Specifications
- 4.Software Interface
- 5.Mechanical and Environmental Certifications
- 6.Regulatory Compliance and Certification
- 7.Safety Recommendation
27
/
37
□ Normal □ Internal Use Confidential □ Restricted Confidential
User Manual
The characteristic impedance depends on the dielectric of PCB, the track width and the
ground plane spacing. Microstrip type is required. The detail simulation as below.
The RF trace of the test board which was used in the FCC test is defined as below.