User's Manual
Table Of Contents
- Introduction
- Abbreviation
- Features
- Electrical Specifications
- Host interface pin assignments
- LGA Pad Diagram
- Pin Assignments
- Power supply
- USB interface
- SGMII interface
- UIM interface
- Control interface
- Power-on Signal
- Wake-up interface
- Reset Signal
- WWAN state Signal
- Digital interface
- JTAG Interface
- SPI Master Interface
- PCM Interface
- I2S Interface
- I2C Interface
- UART Interface
- ADC Interface
- RF Specifications
- RF connections
- Interference and sensitivity
- GNSS external circuit design
- RF Specification
- 3.5.1 Band support
- 3.5.2 Bandwidth support
- 3.5.3 RF Transmit Specification
- 3.5.4 RF Receiver Specification
- 3.5.5 GNSS Receiver Specification
- Power
- Power consumption
- Software Interface
- Support tools
- USB interface
- Mechanical and Environmental Certifications
- PCBA Form Factor
- Reflow
- PCB pad design
- Labeling
- SMT Voids control
- Mother board PCB thickness
- Stencil design
- Thermal considerations
- Regulatory Compliance and Certification
- Certification testing
- Packaging
- Tape-and-Reel Package
- Single Packaging for Samples
- MSL level
- Safety Recommendation
19
/
71
HW Design Guidelines
2nd_SPI_CLK
61
I2C_SDA/
2nd_SPI_EN_1
DI/DO
PD
62
2nd_SPI_MOSI
DI/DO
PD
63
2nd_SPI_MISO
DI/DO
PD
80
UART1_CTS (UART1)
DI/DO
PD
81
UART1_RTS (UART1)
DI/DO
PD
82
UART1_RX (UART1)
DI/DO
PD
83
UART1_TX (UART1)
DI/DO
PD
92
GPIO92
DI/DO
PD
93
GPIO93
DO
NP
94
GPIO94
DI/DO
PD
95
GPIO95
DI/DO
PD
96
GPIO96
DI/DO
PD
97
GPIO97
DI/DO
PD
98
GPIO98
DI/DO
PU
101
GPIO101
DI/DO
PD
102
GPIO102
DI/DO
PD
103
GPIO103
DI/DO
PD
106
UART2_RX (UART2)
DI/DO
PD
107
UART2_TX (UART2)
DI/DO
PD
120
GPIO120
DI/DO
PD
123
GPIO123
DI/DO
PD
124
GPIO124
DI/DO
NP
125
SPIM_MOSI
DI/DO
PD
126
SPIM_MISO
DI/DO
PD
127
SPIM_EN
DI/DO
PD
128
SPIM_CLK
DI/DO
PD
129
GPIO05
DI/DO
PD
130
GPIO06
DI/DO
PD
131
GPIO07
DI/DO
PU
132
GPIO08
DI/DO
PD
141
WWAN_STATE
DI/DO
PD