Product specification for Smart module PW8Q7 User Manual for PW8Q7 smart module Wistron NeWeb Corp.
Product specification for Smart module PW8Q7 Revision History Version Change history Date A01 Initial version 2013-12-20 CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE PROPERTY OF THE WISTRON NEWEB CORPORATION AND SHALL NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED, COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF WISTRON NEWEB CORPORATION.
Product specification for Smart module PW8Q7 Contents Contents ...................................................................................... 3 A. Product Description ............................................................... 4 A.1 General Descriptions ...........................................................................4 A.2 Applicable Device ................................................................................4 B. Main Features ...............................................
Product specification for Smart module PW8Q7 A. Product Description A.1 General Descriptions This document describes and specifies requirements for smart Module PW8Q7, PW8Q7 is smart module for smart phone and Tablet . It can support Bluetooth, WiFi and GPS function. It can support SD card, LCM,Touch Screen,Audio,two camera,Flash LED,Accelerometer/ Magnetometer/Gyroscope/Pressure/Temperature/P&L Sensor functions though application design board. A.
Product specification for Smart module PW8Q7 RoHS Compliance Environment Operating temperature: -30℃ ~ +70℃ @ humidity 10% to 85% Storage temperature: -30℃~ +70℃@ humidity 5% to 90% B.1 Application Processor features Qualcomm APQ8060A Dual Core 1.5 GHz processor 1GB LPDDR2 HYNIX H9TKNNN8KDARAR-NGM 8GB eMMC MICRON MTFC8GLVEA-4M C. General Specification Item Parameter Form Factor (mm) 40 x 62 x 5.0 mm Weight (g) 20g (TBD) Processor APQ8060A, Dual Core 1.5 GHz WLAN 2.4GHz/5GHz 802.
Product specification for Smart module PW8Q7 Indicator Lights GPIO D. Application Battery connection A stable and accurate 1.
Product specification for Smart module PW8Q7 E. Power Consumption Min. Work Mode Definition Sleep Airplane; backlight and display off (Airplane mode) WLAN (DTIM1) with W standby WLAN standby, beacon cycle 100 ms F. Mechanic Specifications Page 7 Typ. Max. 3.
Product specification for Smart module PW8Q7 Emergency Download Test Points: Pull these two points to ground if you want to enter the emergency download mode Page 8
Product specification for Smart module PW8Q7 G.
Product specification for Smart module PW8Q7 H. Electrostatic discharge (ESD) The OEM is responsible for ensuring that the Mini board interface pins are not exposed to ESD during handling or normal operation. ESD protection is highly recommended for the user interface connector at the point where the contacts are exposed and for any other signals from the host interface that would be subjected to ESD by the user of the product.
Product specification for Smart module PW8Q7 I FCC and CE Warnings FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules.
Product specification for Smart module PW8Q7 IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Product specification for Smart module PW8Q7 CE Conformance： The device is tested for typical body worn operation. The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm. WLAN 5150MHz to 5250MHz is limited indoor use. Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standards have been applied: 1. Health (Article 3.
Product specification for Smart module PW8Q7 J. Support Support 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. TEL: 886-3-666-7799 FAX: 886-3-612-8391 Website: http://www.wneweb.
