User's Manual

Chapter 5 Using the Web-Based Utility
 The web-based utility on your PC enables you to view, change, or edit the most commonly
used features of your VoIP phone.
5.1 Accessing the Web-Based Utility
1. To start, it is necessary to have your VoIP phone’s IP address. In standby, press
》
Status
》
Phone Status
》
IP Address. If you use a Static IP, the address will stay the same. If you use
a DHCP, the IP address may change every time you turn on the phone.
2. On your PC that is linked to the same network as the phone, launch Internet Explorer. In the
Address field, enter
》
http:// IP Address where the IP address is the VoIP phone’s IP
address that you obtained in step 1. Press
》
Enter.
3. The VoIP phone login screen is displayed. Enter
》
User Name and Password
》
Submit.
You will log in to the Wireless Network Status screen and can select any of the tabs to add
or change phone settings’ information.
Note! The default User Name is admin and the Password is admin, but may change if you
have an ITSP.
Current Status
By selecting Current Status, you will view your VoIP phone’s linkage status: ESSID, BSSID, IP
address and MAC address are indicated.