User's Manual

AudioMagic AVMD6210-SWA12 Module Brief PRELIMINARY v0p1
CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 9 AVNERA PROPRIETARY & CONFIDENTIAL
6.3 Electrical Characteristics
Test Conditions: T
A
=+25ºC, VDC=+5.0V
Table 2 - AVMD6210-SWA12 Electrical Characteristics
PARAMETER CO NDITIONS MIN TYP MAX UNIT
RF Frequency Range 2402 2478 MHz
RF Transmit power -3 0 dBm
RF Receiver sensitivity
1
-86 -89 dBm
Range (LOS) >15 m
Audio SNR I2S Input/Output
2
I2S end to end 16bit mode 90 93 dB
Audio SNR I2S Input/Output
2
I2S end to end 12bit mode 70 72 dB
Analog Audio THD+N
3
tbd dB
Audio Bandwidth (end to end I2S) 0.1dB point 20KHz mode 20 KHz
Audio Bandwidth (end to end I2S) 0.1 dB point 5KHz mode 5 KHz
Current consumption V
DC
(Active Audio mode) 50 mA
Note 1: AV6200 IC specification, measure by conducted u.fl connection at IC
Note 2: AVMD6200-SWA12-TX/RX
Note 3: Measured at -3dbFS input, A weighting. Output is taken, using external DAC on Avnera development board.