User's Manual

24GHz Blind Spot Detection Radar
- Wistron NeWeb Corp. -
1
Blind Spot Detection Radar System
24GHz radar blind spot detection system (hereinafter referred
to as BSD system) is a set of auxiliary system which uses
radar sensor to detect road traffic conditions and visual blind
spot area. It is to provide alert information for driver when
changing lanes. This blind spot monitoring system set range
includes both sides and the rear of the vehicle. The system will
provide different warning level to remind drivers based on the
message of indicator for changing lane once target enter the
blind spot zone.
Notice:
 Blind spot detection system is not able to detect all the cars
in all cases. There is still the risk of accidents.
 Blind spot detection system can not be used to replace the
judgment of driving on the road, do not place undue
reliance on detection results. For changing lanes or similar
operations, driver still needs to concentrate and observe
the surrounding environment.
 If the rear car driving fast, blind spot detection system may
not react.
 Blind spot detection system will start detection
mechanisms with car speed 10 km / h or more.
 If the radar sensor system detects error, a warning light will
be turned on and maintained, this system will point out the
problem comes from left or right side of the sensor.
Radar and Warning System location
Blind spot detection system consists of two radar sensors and
a warning system