User's Manual

24GHz Blind Spot Detection Radar
- Wistron NeWeb Corp. -
2
Radar sensors are installed in the rear bumper of the left and
right sides (such as schematic in Figure 1). The radars on the
two sides help drivers detect vehicles.
(Figure 1)
If the radar sensor is obscured, it may not detect obstacles and
reduce system performance. To avoid radar sensor function is
affected, please pay special attention to the following points:
 Do not shield radar sensor foreign body parts (such as
stickers, bike rack, trailer).
 Avoid bumper was hit or damaged, if the above situations,
such as shock or damage, please contact the service
center as soon as possible and repair.
 Ensure that the soil/ snow or ice on the site of the radar
sensor has been cleared..
Warning system will be installed in the driver's seat and front
passenger side A-pillar (as shown in Figure 2).
(Figure 2)