User's Manual

24GHz Blind Spot Detection Radar
- Wistron NeWeb Corp. -
3
Blind spot detection system startup and shutdown
Start up
After pressing the button, the button's indicator light is and the
system is turned on.
Shut down
Pressing the button again, the indicator on the button goes off
button and the system is shut down. When you turn off the
system, you will not receive alerts.
Blind spot detection system switch will remain in the
position you set.
Warning level
Blind spot detection system provides the driver lance change
assistance according to if driver uses indicator light when
changing lane.
Warning display is divided into two levels:
Level One Warning:
If you are on a normal driving lane and do not intend to use
light indicates to change lanes, blind spot detection system
only detects whether both sides would become a danger for
the car to change lanes. If the relative speed and relative
distance are considered to be hazardous for changing lane,
warning system on A pillar will provide light alert.
Level Two warning:
If you use indicator to change lane and the blind spot detection
system detects the danger from both sides, the warning
system will provide light and audio alert.