User's Manual

24GHz Blind Spot Detection Radar

- Wistron NeWeb Corp. -

Level One and Level Two warning is to remind the driving

situation. Driver still needs to concentrate and observe the

driving conditions.

Detection range and warning systems

When you start the engine / ACC (TBD), the blind spot

detection system indicator will appear briefly lit and warning

beep sound to confirm that the system is functioning properly.

For automatic transaxle car, this system only works when

the S, D gear.

Blind Spot Detection System provides alert for driver

assistance (As shown in Figure A). when another vehicle from

behind goes into the blind spot area, referred to here as the

blind spot area extending from the sides of the vehicle around

the rearview mirror to a position about 3 meters away from the

bumper .

Blind spot detection system will active when the vehicle speed

exceeds 10km/h. Level one warning will be triggered when you

overtake or another vehicle comes from the front into the blind

spot area with relative speed equal or less 10km/h.

When the vehicle pass rapidly through the blind spot

region (The relative speed is greater than 60km/h, or

less than 2 seconds Time to Collision) will not trigger the

alarm.

Blind spot detection system does not have the ability to

measure the width of the lane. The system is based on a fixed

lane width to detect. The main detection range is the normal

driving lane which cover two adjacent lanes. It does not