User's Manual

24GHz Blind Spot Detection Radar
- Wistron NeWeb Corp. -
6
Please note that the design of the blind spot detection
system is not used to avoid collisions with other vehicles
or objects. blind spot detection system cannot be sole
basis for for hanging lanes. Please keep driving carefully. This
system provides a warning only as a assistant tool to help you
to find the vehicle in blind spot area.
Radar detection limitation
In some cases, when the vehicle enters or leaves the blind
area it may cause improper detection.
The conditions are below:
 Abnormal driving conditions
 Mud, snow or ice deposits in the rear bumper which is on
radar sensor radiation area.
 Vehicle pass through the blind spot area with high speed..
(Less than two seconds)
 Radar detection sensitivity may be reduced suddenly
because of the rain, snow and splashes in a blind spot
detection system. The Blind Spot Detection System may
not detect timely or even miss detection to the car. Driver
needs to continue to maintain driving direction and carefully
observe the surrounding environment.
 When multiple vehicles pass through the blind spot area
closely, it may not get alert for the following vehicle.
 In narrow curve lane, the blind spot detection system can
not detect the car. When driving into the corners, it may get
Level One Warning for the oncoming vehicles in adjacent
lane.
 If there is a short error, such as a car battery power is too
low, it may be temporarily unable to start the blind spot
detection system.
 In the heavy rain or condition which may affect detection,
the radar sensor may not detect obstacles.