User's Manual

24GHz Blind Spot Detection Radar
- Wistron NeWeb Corp. -
7
False alarms
In some cases, an warning occurs but there is no vehicles in
the blind spot area. In this case, the alarm is usually a
temporary error and the system will correct itself.
Conditions may cause false alarms are as follows:
 Bush
 Construction fence
 highway concrete walls
 Narrow road curve or arch
 Sharp turn around the building
 Guide barricade placed in high or misplaced
 Road barricade
 Equip with non-recognized trailer hitch: The system should
be close to avoid false alert if the trailer is used. For the
trailer hitch that is installed at the factory, as you plug
power to the trailer socket, blind spot detection system will
automatically open.