User and Installation Guide ST2 STARMATE REPLAY SIRIUS Satellite Radio Plug and Play
Safety Precautions ........................................................... 4 FCC Warning .................................................................... 5 Cleaning the Receiver ....................................................... 5 Package Contents ............................................................ 6 Installation ....................................................................... 7 Location .......................................................................
ST2 Starmate Replay User and Installation Guide FM Preset Button ...................................................... Menu Options ................................................................ FM Transmitter .......................................................... FM Presets ............................................................. FM On/Off ............................................................... Game Alert ................................................................. Settings ......
Warning Take the following precautions to prevent fire and avoid personal injury: • Be sure the Receiver is installed as described in the Installation Guide. • The use suggestions contained in this User Guide are subject to any restrictions or limitations that may be imposed by applicable law—the purchaser should check applicable law for any restrictions or limitations before installing and/or operating this Receiver.
ST2 Starmate Replay User and Installation Guide Warning Do not operate the Receiver in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times. Note: This equipment has been tested and found to comply with Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against harmful interference.
1 P.
ST2 Starmate Replay User and Installation Guide Location Choose a location in your vehicle where the Receiver will not block your vision, interfere with the vehicle controls, or obstruct the air bag. The location should be suitable for using the suction cup mount, such as the windshield or other flat, smooth surface, or a surface suitable for using the velcro mounting. The location should be easily reachable and provide Installation Installation of your ST2 Starmate Replay Receiver is easy: 1.
Place the Receiver into the mounting plate by first placing the bottom of the Receiver into the tabs at the bottom of the mounting plate (1), and then pivoting the top of the receiver into the mounting plate until it snaps into place (2). If you are using the velcro strip for mounting, attach the velcro strip to the back of the mounting plate. Route the cables through the mounting plate underneath the tabs as shown.
ST2 Starmate Replay User and Installation Guide 3. Place the suction cup mount on the windshield, or other area, and press the cam lever straight down towards the suction cup to flatten the suction cup as shown. 9 Installing the Magnetic Antenna The optimum mounting location for the antenna is on the roof of the vehicle, with a minimum unobstructed area of 12 inches by 12 inches, and exactly 6½ inches from the rear roof edge of the vehicle (the length of the rubber antenna cable cover/tail).
Pickup Truck: Mount the antenna along the rear centerline of the cab roof, located at the rear of the roof near the rear window. SUV/Mini-Van: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear door/hatch. performance from the antenna. Sedan/Coupe: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear window.
RUBBER ANTENNA CABLE COVER/TAIL ANTENNA (UNDERSIDE) ST2 Starmate Replay User and Installation Guide Temporarily position the antenna and rubber antenna cable cover/tail in the selected mounting area and route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown. ANTENNA CABLE ADHESIVE STRIP PROTECTIVE MATERIAL (RED SIDE) 11 Route the cable from the lowest point of the rear window into the trunk.
Note: At room temperature (68 degrees), maximum adhesion usually occurs within 72 hours. During this period, avoid car washes and other contact with the antenna and rubber antenna cable cover/tail. VEHICLE MOUNTING SURFACE RUBBER ANTENNA CABLE COVER/TAIL Double check that the location of the antenna and rubber antenna cable cover/tail are correct, and continue to press firmly down on rubber antenna cable cover/tail for another 30 seconds.
ST2 Starmate Replay User and Installation Guide Wait until the channel updates have completed before pressing any buttons on the Receiver. 3. Once the channels have been updated, the display will change to “Call 1-888-539-SIRIUS to Subscribe” and will place you in SIRIUS Satellite Radio’s Preview Channel, channel 184.
12:00P 14 6. Have your credit card handy and contact SIRIUS on the Internet at: https://activate.siriusradio.com/ and follow the prompts to activate your subscription. You can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474) 7. When you have successfully subscribed to the SIRIUS service, and the Receiver has been updated with your subscription information, an alert will be displayed. A SIRIUS ID SID 012345678912 000 again.
ST2 Starmate Replay User and Installation Guide Home Kit (STH2) The optional home kit allows you to enjoy the SIRIUS Satellite Radio’s digital entertainment in your home, by allowing you to take your Receiver from your vehicle into your home. The kit consists of the following items: Stand - A stand into which to snap your Receiver while being used in your home. AC Adapter - A power adapter to power your Receiver in the home.
11 12 13 14 1 P.
ST2 Starmate Replay User and Installation Guide 1. POWER Button : Turns the Receiver’s power On and Off. 2. Rewind Button: Used to rewind through a broadcast saved in Instant Replay. 3. Play/Pause Button: Pause Function: Used to pause a broadcast for Instant Replay. Play Function: Used to play a broadcast saved in Instant Replay. 4. Fast Forward Button: Used to fast forward through a broadcast saved in Instant Replay. 5.
5 8 7 0 2 4 MEMO BAND 1 DISP MENU 2 9 6 3 – + MUTE 3 9 8 5 6 7 4 18 Installing Batteries in the Remote Control 1. Remove the battery cover. 2. Install CR2025 battery. (+ positive side is up) 3. Replace the battery cover. 10 14 13 12 11 15 16 1 Remote Control ST2 Starmate Replay User and Installation Guide Power Button : Turns the Receiver power On and Off. Category Previous/Next Buttons: Navigates through categories. MUTE Button: Mutes the audio.
Channel Category Category 12:00P A Channel Name Artist Name Song Title 001 Default Display Screen Clock Band/Preset Bank Number Channel Name Auto Sizing/ Scrolling Song Title ST2 Starmate Replay User and Installation Guide Changing Channels Pressing the channel up or down button will cause the Receiver to immediately tune to the next or previous channel.
Category 12:00P Category 12:00P 20 A Channel Name Artist N 001 Pressing and holding the DISP button for 1½ seconds will cause the Receiver enter the channel list mode. The channel list mode makes it easy to quickly search for and locate music by channel, by category, by artist, and by song title.
ST2 Starmate Replay User and Installation Guide Category 12:00P A Channel Name Enter Channel # ___ Artist N 001 Selecting Channels Directly A channel may be directly selected by entering the channel number using the 0 - 9 buttons on the Receiver. To enter a channel number, momentarily press and release the select button. At the display prompt enter the three digit channel number. through the available channels in each category to find the channel to which you want to listen.
Using Channel Presets The active band of presets is displayed in the lower right corner of the default display screen, A, B or C. To change the active band, momentarily press and release the BAND button to cycle between the preset bands. The 10 preset channels in the active band can then be selected by momentarily pressing and releasing the 0 through 9 buttons.
Name Name Name Name Name A-1 A-2 A-3 A-4 A-5 Name Name Name Name Name Song Song Song Song Song Title Title Title Title Title Note: If you are viewing a sports category channel list (NFL®, NBA®, NHL®, or COLLEGE), pressing the DISP button will instead toggle Artist Artist Artist Artist Artist Channel Channel Channel Channel Channel ST2 Starmate Replay User and Installation Guide A-1 A-2 A-3 A-4 A-5 A-1 A-2 A-3 A-4 A-5 presets are grouped and displayed by bank and preset number, i.e., A-1, A-2...
Storing Artist Names, Song Titles, and Sports Teams to Memory If you are listening to a song or other entertainment channel, or a sports team, and wish to save the artist, song, or sports team selection to memory for future S-Seek alerts, do the following: 1. For Artist Names or Song Titles: If the currently tuned channel is a music or entertainment channel, momentarily press and release the MEMO button. The Receiver will display a menu to choose to store the artist name or the song title.
Category 12:00P ST2 Starmate Replay User and Installation Guide Using the channel up and down buttons, choose the desired sports team (when available) and press the select button to save the current selection to memory. The next screen will ask which kind of alert you wish to have. Category 12:00P A Channel Name Store NYG? Artist Name Team2Title Unavailable Song 100 If either of the teams is not available to save, that team will be displayed as unavailable.
A Category 12:00P A Channel Name Category 12:00P 001 Artist Name X Used/Y Empty Song Title Channel Name Artist Name Artist Stored Song Title 001 The Receiver will then revert to the last active display mode. 4. If the new alert was successfully stored in memory, a “Artist/Song/Game Stored” pop-up screen followed by an “X Used/Y Empty” screen will be displayed for 1 and 2 seconds respectively.
A ST2 Starmate Replay User and Installation Guide The Receiver will revert to the last active display mode. A Category 12:00P Channel Name Category 12:00P 001 Artist Name X Used/Y Empty Song Title Channel Name Artist Name Artist Stored Song Title 001 Artist Artist Sports Artist X/Y Replace Name/ Song Tit Name Team Name/ Song Tit Using the channel up and down buttons, highlight the alert that you would like to overwrite and press the select button to store the new alert.
To permanently delete the alert from the memory list, highlight “Yes” using the channel up and down buttons and press the select button to confirm. 5. A “Deleted” pop-up screen followed by an “X Used/Y Empty” screen will be displayed for 1 Yes No Delete 4. Use the channel up and down buttons to highlight the “Delete” option, and press the select button. A delete confirmation screen will appear. Memory Recall Seek On Seek Off Delete select button. 3.
001 Category 12:00P A Channel Name Artist Name Game Alert Song Title ST2 Starmate Replay User and Installation Guide The Receiver then displays the S-Seek Alert or My Game Zone screen, which displays a list of the current matches. No alert is provided for the currently selected channel. Category 12:00P A Channel Name Artist Name S-Seek Alert Song Title 001 3. To enable S-Seek alerts, use the channel up and down buttons to highlight the “Seek On” option and press the select button.
Channel Name 30 Pressing the Jump button again while the Receiver is actively searching will cancel the search. Category 12:00P Artist Name NYC Pending Song Title 001 news channel, a sports channel, or any channel at all. Pressing the Jump button allows you to quickly tune to the specific channel you have programmed into the Jump button, and then tune back to the original channel by pressing the Jump button again.
Category 12:00P MY GAME ZONE 100 Giants @ Cowboys 123 Bulls @ Cavaliers ST2 Starmate Replay User and Installation Guide You can then use the channel up and down buttons to highlight your favorite sports team in the list, and then press the select button to tune to the channel where the game is being broadcast. Refer to the Game Alert section in the Menu Options section of this manual for instructions on programming your favorite sports teams into the Receiver.
REPLAY LIST Live Song Title Song Title Song Title 32 • Fast Forward button. The fast forward button forwards you through the stored audio. Pressing and releasing the Fast-Forward button forwards to the start of the next song or program in the stored audio, and playback automatically begins.
ST2 Starmate Replay User and Installation Guide program in the stored audio, and playback automatically begins. Repeatedly pressing and releasing the Rewind Button causes the Receiver to continue to move backwards in the stored audio to the start of each previous song or program until the beginning of the stored audio is reached. If the beginning of the stored audio is reached, a beep will be heard (if the Confirmation Tone option is enabled) and playback will automatically begin.
describing the Rewind and Fast-Forward buttons for specific instructions for their use. Note: If the Receiver is tuned to another channel while in the Instant Replay mode, the Instant Replay mode is exited, all the audio stored in the Instant Replay memory is erased, and the tuned channel begins to play. Also note that tuning to another channel may automatically occur if another feature of the Receiver has been programmed to do so.
ST2 Starmate Replay User and Installation Guide Artist Name Song Title 001 Ch. Name -00:20:03 Play Position Indicator A diamond-shaped Play Position indicator is superimposed over the Progress Bar which provides a visual indicator of the current playback position in the Instant Replay memory. Artist Name Song Title 001 Ch. Name -00:20:03 End of Stored Audio Beginning of Live Broadcast Progress Bar Showing Amount of Memory Filled been used, the bar will be completely filled.
stored at the same rate at which you are playing back the stored audio. You can use the FastForward button to skip ahead or exit the Instant Replay mode, and begin listening to the live broadcast again. Should you press the Play/Pause button to stop the playback, the play position indicator will stop moving and continue to provide a visual indication of your current position in the Instant Replay memory.
ST2 Starmate Replay User and Installation Guide FM Preset Button The Receiver has a special button called the FM Preset button, which is identified by the icon. When the FM Preset button is pressed, the Receiver turns on the built-in FM transmitter and begins transmitting on the next frequency from the FM frequency preset list. A screen will be displayed for 3 seconds showing the currently selected FM frequency.
FM Transmitter The FM Transmitter feature allows you to create a preset list of 5 suitable FM frequencies which can then be accessed by using the FM Preset button. This option also allows you to turn the FM To select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button. If a selection is not made within 10 seconds, the Receiver will exit the menu options screen, and revert to the last active display mode.
ST2 Starmate Replay User and Installation Guide FM On/Off To turn the Receiver’s FM transmitter On or Off, use the channel up and down buttons to highlight the “FM On/Off” menu item and press the select button. 3. Use your FM radio to locate quiet FM frequencies where there is no interference from adjacent FM stations. These are the frequencies which should be added to the FM Presets list. 4.
NFL None Arizona Cardinals Atlanta Falcons Baltimore Ravens COLLEGE None Alabama Auburn Colorado 3. Use the channel up and down buttons to highlight the league team name or college team name you wish to add, and press the select button. Game Alert NFL NBA NHL COLLEGE by using the Memory (MEMO) function. (See the section titled, Memory (MEMO) and Song Seek (SSeek) Functions for more information about adding additional teams.) To choose sports teams to add for game alerts, do the following: 1.
Traffic: ATL Jump Set Jump Setting ST2 Starmate Replay User and Installation Guide Two options are available for the Jump setting, “Traffic” and “Jump Set’. The currently selected option is indicated by the Jump icon. The Traffic option sets the function of the Jump button to provide a traffic report for a selected city, while the JumpSet option assigns any channel to the Jump button.
Use the channel up and down buttons to tune to the channel you want assigned to the Jump button. When the channel is tuned, press and hold the Jump button for 2 seconds until the following screen is displayed. Jump Setting Tune to desired Ch. press & hold the button JumpSet To set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following: 1. Use the channel up and down buttons to highlight the “JumpSet” option, and press the select button. 2.
+ - Contrast + ST2 Starmate Replay User and Installation Guide Auto Memory Search Clear All Memory Memory Options Memory Options The Memory Options feature allows you to set whether the automatic S-Seek feature is On or Off, and also provides the a way to clear (erase) all the stored S-Seek alerts from memory. To exit the Brightness/Contrast screen, press the MENU button. - Brightness Brightness adjusts the overall intensity of the LCD display to help with viewing in different lighting conditions.
Auto Select Auto Select chooses whether the Receiver immediately tunes to a channel when a channel is highlighted, or whether you must first press the select button in order to tune to a highlighted channel in any of the list modes. Turn Auto Select On if you would like the Receiver to automatically tune to the highlighted channel without you having to press the select button. This will allow you to quickly listen to all the available programming in any displayed channel list.
ST2 Starmate Replay User and Installation Guide Lock/Unlock Edit Code Parental Control Parental Control The Receiver has the ability to lock out with password protection any channels you do not want others to access without your permission. A locked channel will not appear in the channel list. To exit the Confirmation Tone menu, press the MENU button. On Off Confirm.
4. When the correct code has been entered, a listing of channels will be displayed. Use the channel up and down buttons to navigate to the channel you wish to lock or unlock, and press the select button. A previously locked channel ST2 Starmate Replay User and Installation Guide Edit Code This setting allows you to change a previously selected Parental Control code. The first time the Edit Code setting is accessed you will be prompted to enter a four digit code.
ST2 Starmate Replay User and Installation Guide 47 6. If you confirmed the correct code, the lock code is now changed and a confirmation screen is displayed. If you entered the wrong code at the confirmation prompt, a screen will be displayed to alert you that you have entered the wrong code, and you will have to repeat the process again. # ____ 3.
Wrong Code Code Saved 48 Time Based Features These settings allow for adjustment of the following features of the Receiver: Clock - Sets the clock format, time zone, and daylight savings time function. Alarm - Sets an alarm for a specific time. Program Alert - Sets the Receiver to tune to a specific channel at a specified time. Auto Shutdown - Sets the Receiver to turn off at a specified time. Sleep Mode - Sets the Receiver to turn off after a designated period of time.
ST2 Starmate Replay User and Installation Guide Time Zone To change the time zone of the Receiver, do the following: 1. Use the channel up and down buttons to highlight “Time Zone”, and press the select button. 2. Use the channel up and down buttons to highlight the proper time zone for your location, and press the select button. To exit the Clock menu, press the MENU button.
To exit the Set Alarm menu, press the MENU button. On Off Set Alarm Set Alarm To turn the alarm On or Off, do the following: 1. Use the channel up and down buttons to highlight “Set Alarm”, and press the select button. 2. Use the channel up and down buttons to highlight “Alarm On” or “Alarm Off”, and press the select button. Set Alarm Alarm Time Alarm Alarm This feature allows you to set an alarm to sound at a specific time each day, and to turn the alarm feature On or Off.
ST2 Starmate Replay User and Installation Guide 3. Use the channel up and down buttons to change the minutes, and the category previous and next buttons to change the hours, to select the time Time Day Program Time/Day Program Time/Day To program the time and day when the receiver will tune to the specified channel, do the following: 1. Use the channel up and down buttons to highlight “Program Time/Day”, and press the select button. 2.
Category 12:00P 52 Program Alert On/Off To turn the Program Alert feature is On or Off, do the To exit the Channel Number menu, press the MENU button. A Channel Name Artist Name Song Title 001 Channel Number To set the channel to which the receiver will tune when the Program Alert feature is On, do the following: 1. Use the channel up and down buttons to highlight “Channel Number”, and press the select button. 2.
Channel Name A ST2 Starmate Replay User and Installation Guide Sleep Mode The Receiver can be set to turn off automatically To exit the Auto Shutdown menu, press the MENU button. Enabled Disabled Auto Shutdown To enable or disable the Auto Shutdown feature, do the following: 1. Use the channel up and down buttons to highlight “Auto Shutdown”, and press the select button. 2. Use the channel up and down buttons to highlight “Enabled” or “Disabled”, and press the select button.
+ TER - 54 Factory Default The Factory Default option will restore most every feature of the Receiver to the original factory settings. The following is a list of all features affected by the Factory Default option: 2. Two 10 segment horizontal bar graphs will be displayed with a “-“ sign to the left and a “+” sign to the right. SAT indicates the satellite signal strength while TER indicates the terrestrial signal strength, if a terrestrial signal is available.
ST2 Starmate Replay User and Installation Guide 4. If Yes is chosen, the Receiver will revert to the Yes No Are You Sure? 3. If “Yes” is chosen, a confirmation is displayed. Use the channel up and down buttons to select “Yes” to restore all settings to the settings from the factory, or select “No” to leave them as-is and return to the Menu Options menu. Yes No Restore Settings? the features of the Receiver to the factory defaults, do the following: 1.
FM frequency contains static. Locate a quiet FM frequency on your vehicle radio and set the Receiver’s FM transmitter frequency to match. The vehicle antenna is not connected to radio. Check vehicle antenna cable to be sure it is connected. Check for obstacles over or around satellite antenna. Change vehicle location to eliminate nearby obstacles (bridges, overpasses, etc.) The audio cables are not connected, or the FM radio is set to the wrong frequency.
ST2 Starmate Replay User and Installation Guide 57 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
12 MONTH LIMITED WARRANTY 58 ST2 Starmate Replay User and Installation Guide WARRANTY RETURN: To obtain repair or replacement within the terms of this Warranty, please return product to an authorized retailer or call Customer Service at 1-888-869-5590; proof of purchase and description of defect are required. Products to be returned to an approved warranty station must be shipped freight prepaid. This Warranty is in lieu of all other express warranties or liabilities.
ST2 Starmate Replay User and Installation Guide SIRIUS Customer Service: 1-888-539-7474 SIRIUS Product Support: 1-800-869-5590 customercare@sirius-radio.
SIRIUS Satellite Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1-888-539-7474 www.sirius.
