User's Manual

[ Operation ]
24
Storing Channel Presets
To store a favorite channel as a preset, do the following:
Momentarily press and release the BAND button until the desired preset band, A, B, or
C, is displayed in the lower right corner of the default display screen.
Tune the receiver to the channel you wish to store as a preset. (Refer to the section
Changing Channels for specific instructions for tuning to a channel.)
Press and hold the numbered preset button in which you wish to store your favorite
channel for 1½ seconds until you hear a beep. The band and preset number will then be
displayed in the lower right corner of the display screen to confirm that the channel has
been stored. (Figure 7)
001
Category 12:00P A1
Artist NameArtist Name
Song TitleSong Title
Channel Name
Preset Stored
Note: If the preset button already has a channel stored in it, the preset will be replaced by the
newly stored channel.
Using Channel Presets
The active band of presets is displayed in the lower right corner of the default display screen,
A, B or C. To change the active band, momentarily press and release the BAND button to
cycle between the preset bands.
The 10 preset channels in the active band can then be selected by momentarily pressing and
releasing the 0 through 9 buttons.
When you have chosen a preset channel, the band and preset number will be displayed in the
lower right corner of the default display screen. (Figure 8)
1.
2.
3.
Figure 7Figure 7