User's Manual

2-2 User’s Guide
2.2.2 Installing the PCMCIA card
To install the PCMCIA card into a notebook computer, simply plug the card into an empty
PCMCIA slot. There is no need to turn off the notebook computer in order to remove or
insert a card. If the notebook computer is off, turn it on. Without installing the Warplink driver
and utility properly, the Warplink would not work properly. But please be noticed that the
Warplink driver and utility have to be installed. The Warplink driver and utility could be found
in the accompanying CD. The installation procedure is in Section 2.3.
Note : 1. Be sure to reserve a empty PCMCIA slot for Warplink
2. Before the Warplink driver and utility are both installed, please do not insert the
Warplink into the PCMCIA slot.