User's Manual

< PPPoE + Dynamic IP >

The PPPoE + Dynamic IP mode enables you to access the

Internet using a PPPoE dial-up connection or a dynamic IP

address.

1. Select PPPoE + Dynamic IP from the Connection mode

drop-down list.

2. Set Point-to-Point Protocol over Ethernet (PPPoE) and

Dynamic IP parameters.

< PPPoE>

This option is normally used by the DSL modem users to enter

authentication information. You will need to have the user

name and password provided by your network service provider

for the PPPoE dial-up connection.

1. Select PPPoE from the Connection mode drop-down list.

2. Enter the user name and password provided by your

network service provider.

3. Set the MTU. The default MTU size is 1480. Please do not

edit the number unless absolutely necessary.

This option is suitable for Internet services that do not require

account authentication, for example, in most cable-modem

usage scenarios.

1. Select Dynamic IP from the Connection mode drop-down

list.

2. Select the Set DNS server manually check box.