User's Manual

upgrades and scheduled policies. Setting the system time

correctly is also required to enable the firewall schedules to

function properly.

Current time: Displays the current time of the Router.

Mode: You can set the computer clock time manually or

choose to synchronize the time automatically.

Primary NTP server: Select an NTP server from the drop-down

list to sync.

Secondary NTP server: The second NTP server to sync in case

the first server does not respond. Select one from the

drop-down list.

Time zone: Select the local time zone.

Daylight saving time: Check Enable to turn on the daylight

saving function.

From: Specify the start time to apply daylight savings time.

Start date: Enter the start date on which you wish the

synchronization to start.

To: Specify the end date in which you wish the synchronization

to end.

End date: Enter the end date on which you wish the

synchronization to end.

Offset time: Specify a value between 1–1440 (minutes) as the

offset time.

If you want to configure the time manually, select Manual and

enter the local time.