User's Manual

ManualsBrandsWistron NeWeb ManualsElectronicsBLE Module

XRBH-1 User Manual

(V0.4)

Model Name: XRBH-1 BLE MODULE

Description: BLE module compatible

This document contains proprietary information which is the property of Wistron NeWeb

Corporation and is strictly confidential and shall not be disclosed to others in whole or in part,

reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the

written permission of Wistron NeWeb Corporation.

Summary of content (16 pages)

PAGE 1
XRBH-1 User Manual (V0.4) Model Name: Description: XRBH-1 BLE MODULE BLE module compatible This document contains proprietary information which is the property of Wistron NeWeb Corporation and is strictly confidential and shall not be disclosed to others in whole or in part, reproduced, copied, or used as basic for design, manufacturing or sale of apparatus without the written permission of Wistron NeWeb Corporation.
PAGE 2
Revision History Edition # V0.1 V0.2 V0.3 V0.4 Reason for revision Initial Document (Draft version) Add Module Dimension Modify FCC Warning Message Modify Max Transmit Power BLE module Delivery Specification 1 Issue date 2017/04/06 2017/04/11 2017/04/12 2017/05/08 V0.
PAGE 3
NRF52832 Block Diagram 1 BLE module Delivery Specification 2 V0.
PAGE 4
Specification CATEGORIES FEATURE Bluetooth® V4.2 (Single Mode/Bluetooth Smart) Frequency 2.402 - 2.480 GHz Wireless Specificiation Max Transmit Power 4dBm +/- 1.
PAGE 5
Electrical characteristics DC/DC mode Symbol Minimum Typical Maximum Unit VCC 1.8 3 3.6 V Power consumption Symbol Description Typical Unit IOFF System off current consumption 0.7 uA IIDLE 3V ON, all blocks idle 1.9 uA BLE module Delivery Specification 4 V0.
PAGE 6
Mechanical Dimension BLE module Delivery Specification 5 V0.
PAGE 7
BLE module Delivery Specification 6 V0.
PAGE 8
Recommend Land Pattern BLE module Delivery Specification 7 V0.
PAGE 9
PIN Define Pin number Name Function 2 SWCLK Digital input 3 SWDIO Digital I/O 4 P0.21/RESET Digital I/O 5 P0.22 Digital I/O 6 7 P0.20/ TRACECLK P0.18/ TRACEDATA[0] Digital I/O Description Serial Wire Debug clock input for debug and programming. Serial Wire Debug I/O for debug and programming. General purpose I/O pin. Configurable as pin reset. General purpose I/O pin. General purpose I/O pin. Trace port clock output. General purpose I/O pin. Digital I/O Trace port output.
PAGE 10
22 P0.08 Digital I/O General purpose I/O pin 24 P0.06 Digital I/O General purpose I/O pin 25 P0.04/AIN2 Digital I/O General purpose I/O pin Analog input SAADC/COMP/LPCOMP input. 26 P0.05/AIN3 Digital I/O General purpose I/O pin. Analog input SAADC/COMP/LPCOMP input. 27 P0.03/AIN1 Digital I/O General purpose I/O pin Analog input SAADC/COMP/LPCOMP input. 29 P0.02/AIN0 Digital I/O General purpose I/O pin Analog input SAADC/COMP/LPCOMP input. 31 P0.
PAGE 11
Antenna Type Antenna Vendor WNC Antenna Type PCB ANTENNA Antenna Specification BLE module Delivery Specification 10 V0.
PAGE 12
Test condition BLE module Delivery Specification 11 V0.
PAGE 13
BLE module Delivery Specification 12 V0.
PAGE 14
FCC Compliance Statement (1) (2) FCC Label Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
PAGE 15
(4) (5) (6) Radiation Exposure Statement This device is intended only for OEM integrators under the following conditions: 1) this equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC RF exposure guidelines in Supplement C to DET 65 RF exposure rules.
PAGE 16
本產品符合低功率電波輻射性電機管理辦法第十二條 ※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 ※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 -前項合法通信，指依電信法規定作業之無線電通信。 -低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。此模組若安裝於其他平台時，該平台標籤需標明：此平台內建無線模組 BLE module Delivery Specification 15 V0.