User's Manual

User's manual NAVIGON 72XX
- 42 - Navigation
11 If you are navigating a route with several stages, you will see the
remaining distance to the next stage point and the estimated time of
arrival in the Next field.
► Tap on the ETA if you want the estimated duration of travel to be
displayed instead.
► Tap again on the info box if you want the ETA to be displayed
again.
12 The name of the next route section you will enter is indicated in the
upper street field.
13 The name of the route section where you are currently located can be
seen in the lower street field.
Note: The displays of many of the above mentioned areas can be
configured in Options
> Settings > Navigation. Some displays will only
function if the required information is available on the map..
Note: If you tap on the large arrow box, the current route instruction will
be repeated.
► Tap on Options > Turn-by-Turn List to view detailed directions for
the route. (Refer to "
Turn-by-Turn List" on page 48)
► Tap on (Destination search) in order to view the map in
Destination search mode. (Refer to "
Map in Destination search
mode" on page
44)
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
1. Tap on
(Volume).
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder), (Quieter), (Volume on/off).
2. Tap on
(Volume) again or wait a few seconds.
The volume bar closes.
Quitting navigation
Tap on (Back) in order to quit navigation. A dialog box will
prompt you to confirm.