User's Manual
Table Of Contents
- Table of contents
- 1 Introduction
- 2 Before you begin
- 3 Switching on the NAVIGON 72XX
- 4 Password Lock
- 5 Operating the NAVIGON 72XX
- 6 Navigation
- 6.1 Starting the navigation application
- 6.2 Specifying a destination
- 6.2.1 Specifying the country in which the destination is situated
- 6.2.2 Entering an address
- 6.2.3 Selecting the destination address by voice command
- 6.2.4 Points of interest
- 6.2.5 Information about the destination
- 6.2.6 Last Destinations
- 6.2.7 Favourites
- 6.2.8 Imported addresses
- 6.2.9 Navigating home
- 6.2.10 Selecting destinations on the map
- 6.2.11 Starting navigation
- 6.3 Managing destinations
- 6.4 Multi-leg routes
- 6.5 Options
- 6.6 Working with the map
- 6.7 Useful functions
- 7 Handsfree Module
- 8 Configuring the NAVIGON 72XX
- 9 Appendix
- 10 Troubleshooting
- 11 Index
User's manual NAVIGON 72XX
Navigation - 47 -
► You may select another help address of the selected category using
the
(Up) and (Down) keys.
The help addresses are sorted by distance from your current
location.
► Use the (Back) to go back to the DIRECT HELP window.
Note: Help addresses are only listed if they are not more than 30 mi
away from your current position.
6.7.2 GPS Status, saving the current location
In the GPS STATUS window you will find an overview of the data the
navigation system calculates from the GPS signals it receives.
The GPS status can be accessed from the options button in many
windows.
► Tap on Options > GPS Status.
The current location can be saved in the F
AVOURITES list.
1. Tap Save Position
.
The S
AVE DESTINATION AS... dialog box opens.
2. Enter a name for the destination.
3. Tap Save
.
6.7.3 Block
Tap this button to block off a section of the route. For example, you
have heard about a traffic jam in this route section on the radio and now
would like to calculate a route around this area.
Note: The block is valid for the current navigation only.
You are currently in a navigation. The map is open in Navigation mode.
1. Tap short on any place on the map.
Buttons with various functions will be displayed.
2. Tap Block
.
The B
LOCK menu opens.
3. Enter how many miles (from your current position on) you want to
block.
The route is recalculated. The blocked off section will be avoided. It is
highlighted in red on the map.