User's Manual
Table Of Contents
- Table of contents
- 1 Introduction
- 2 Before you begin
- 3 Switching on the NAVIGON 72XX
- 4 Password Lock
- 5 Operating the NAVIGON 72XX
- 6 Navigation
- 6.1 Starting the navigation application
- 6.2 Specifying a destination
- 6.2.1 Specifying the country in which the destination is situated
- 6.2.2 Entering an address
- 6.2.3 Selecting the destination address by voice command
- 6.2.4 Points of interest
- 6.2.5 Information about the destination
- 6.2.6 Last Destinations
- 6.2.7 Favourites
- 6.2.8 Imported addresses
- 6.2.9 Navigating home
- 6.2.10 Selecting destinations on the map
- 6.2.11 Starting navigation
- 6.3 Managing destinations
- 6.4 Multi-leg routes
- 6.5 Options
- 6.6 Working with the map
- 6.7 Useful functions
- 7 Handsfree Module
- 8 Configuring the NAVIGON 72XX
- 9 Appendix
- 10 Troubleshooting
- 11 Index
User's manual NAVIGON 72XX
Handsfree Module - 57 -
Bluetooth Function: Select whether you want to activate the Bluetooth function
(Yes
or No).
The hands-free module cannot connect to a mobile phone if the
Bluetooth function is deactivated.
Discoverable by Others
: Select whether other Bluetooth-capable devices (in
particular mobile phones) should be able to detect the NAVIGON 72XX
(Yes
or No).
Others May Connect
: Select whether other devices should be able to initiate a
connection (Yes
or No).
Reconnect Automatically
: Select whether the connection to the last connected
phone is to be restored automatically when it comes in reach (Yes
or
No
).
Note: The Discoverable by Others
and Others May Connect settings
are effective only when the Bluetooth function is activated.
A Bluetooth connection can be established from the mobile phone only
when Yes
is selected for both settings.
7.6 Connection with Mobile Phone
Note: The Bluetooth functions of both the NAVIGON 72XX and the
mobile phone must be configured accordingly in order for a Bluetooth
connection to be established between the two devices.
For details of how to configure the NAVIGON 72XX refer to chapter
"
Bluetooth Function" on page 56.
For details of how to configure the mobile phone refer to the related
manual.
The NAVIGON 72XX can establish a connection to only one Bluetooth-
capable mobile phone.
As a rule the NAVIGON 72XX will automatically establish a connection
to a mobile phone to which it was once connected already. However,
you can also use this function to establish a connection to a different
mobile phone while a connection between the NAVIGON 72XX and a
mobile phone already exists.
7.6.1 Establishing a connection from the navigation device
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the NAVIGON 72XX.
2. In the H
ANDSFREE MODULE window, tap on Settings > Connection
with Mobile Phone > New Connection.
The navigation device looks for Bluetooth devices and lists all the
devices it recognises.