User's Manual
Table Of Contents
- Table of contents
- 1 Introduction
- 2 Before you begin
- 3 Switching on the NAVIGON 72XX
- 4 Password Lock
- 5 Operating the NAVIGON 72XX
- 6 Navigation
- 6.1 Starting the navigation application
- 6.2 Specifying a destination
- 6.2.1 Specifying the country in which the destination is situated
- 6.2.2 Entering an address
- 6.2.3 Selecting the destination address by voice command
- 6.2.4 Points of interest
- 6.2.5 Information about the destination
- 6.2.6 Last Destinations
- 6.2.7 Favourites
- 6.2.8 Imported addresses
- 6.2.9 Navigating home
- 6.2.10 Selecting destinations on the map
- 6.2.11 Starting navigation
- 6.3 Managing destinations
- 6.4 Multi-leg routes
- 6.5 Options
- 6.6 Working with the map
- 6.7 Useful functions
- 7 Handsfree Module
- 8 Configuring the NAVIGON 72XX
- 9 Appendix
- 10 Troubleshooting
- 11 Index
User's manual NAVIGON 72XX
- 64 - Troubleshooting
9.3.4 Canada C Request
Country Code selection feature to be disabled for products marketed to
the US/CANADA.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
This Category II radiocommunication device complies with Industry
Canada Standard RSS-310.
Cet appareil numerique de la classe [B] est conforme à la norme
NMB-003 du Canada.
Ce dispositif de radiocommunication de categorie II respecte la norme
CNR-310 d'Industrie Canada.
10 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 72XX.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (Refer to
"
Questions about the product" on page 7)
I have connected a charger to the NAVIGON 72XX. A connection to a
computer is shown on the display.
or
I have connected the NAVIGON 72XX to a computer but it is not detected
as a removable disc.
The USB connector of the charger is not fully inserted in the case.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Without delay, insert the USB connector from the charger into the
corresponding socket of the NAVIGON 72XX as far as it will go.
(Refer to "
Description of the NAVIGON 72XX" on page 8)
The USB connector is not connected correctly. See above.