User's Manual
Table Of Contents
- Table of contents
- 1 Introduction
- 2 Before you begin
- 3 Switching on the NAVIGON 72XX
- 4 Password Lock
- 5 Operating the NAVIGON 72XX
- 6 Navigation
- 6.1 Starting the navigation application
- 6.2 Specifying a destination
- 6.2.1 Specifying the country in which the destination is situated
- 6.2.2 Entering an address
- 6.2.3 Selecting the destination address by voice command
- 6.2.4 Points of interest
- 6.2.5 Information about the destination
- 6.2.6 Last Destinations
- 6.2.7 Favourites
- 6.2.8 Imported addresses
- 6.2.9 Navigating home
- 6.2.10 Selecting destinations on the map
- 6.2.11 Starting navigation
- 6.3 Managing destinations
- 6.4 Multi-leg routes
- 6.5 Options
- 6.6 Working with the map
- 6.7 Useful functions
- 7 Handsfree Module
- 8 Configuring the NAVIGON 72XX
- 9 Appendix
- 10 Troubleshooting
- 11 Index
User's manual NAVIGON 72XX
Troubleshooting - 65 -
My NAVIGON 72XX shows no reaction, the screen is frozen.
Reset the device. This can be done in the following ways:
► Press the recessed Reset button with a thin object. (Refer to
"
Description of the NAVIGON 72XX" on page 8)
- OR -
1. Press the
(On/Off) switch for at least 6 seconds.
The device is now switched off.
2. Press the
(On/Off) key until the device switches on. (about
2 seconds)
The software will restart. Your settings and your saved destinations and
routes will not be deleted.
Note: Use only accessories that are allowed by NAVIGON for the
NAVIGON 72XX. NAVIGON AG assumes no liability for errors or
damages that might result from using different accessories.
You will find appropriate accessories under
www.navigon.com or at
your specialised dealers.