User's Guide

Create your face ID and unlock your computer by scanning your face:

1. Open the Start menu and click Settings ➙ Accounts ➙ Sign-in options.

2. Locate the Password section and click Add to create a password.

3. Locate the Windows Hello Face section and click Set up under Face Recognition. Then, click Get

Started. The camera preview starts.

4. Follow the on-screen instructions to create a Personal Identification Number (PIN) and complete the

setup.

5. Click Improve Recognition to improve the image so that Windows Hello can recognize you in different

light conditions or when your appearance changes.

6. Look straight at the camera to log in with your face ID.

Detect human presence

With a face ID created, your computer can support human presence detection.

• Unlock or wake up the computer automatically. You need to face the camera and be at most 1.4 meters

(4.6 feet) from the computer. The function does not work when your computer is in hibernation mode or

has been turned off.

• Dim the display and lock the computer when you are leaving. The function does not work if you set the

power options to never turn off the display.

The human presence sensor is enabled by default. To disable the function:

1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

2. Select Security ➙ I/O Port Access, and then turn on or turn off Human Presence Sensor.

To customize the sensitivity of human presence detection:

1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.

2. Select Security ➙ Intelligent Security, and then follow the on-screen instructions.

Notes:

• These features might not work when your computer is in tent, tablet, or stand mode.

• Your computer uses a human presence sensor to detect your presence and the infrared camera to

recognize your face. Lenovo does not collect any personal data.

X1 Titanium Gen 1 User Guide