User Manual

12
English
Setting up
To set up Acer DW271HL as an independent display, please follow the steps
below:
To install Acer DW271HL on your host system, please follow the steps below:
1 Connect the video cable (VGA / HDMI).
a Make sure both the monitor and computer are switched off.
b Connect the video cable to the computer.
2 Connect the audio cable to the PC to play audio via display speaker.*
3 Connect external speakers.**
4 Connect the power adaptor and power cord to the monitor, then to a
properly grounded AC outlet.
5 Turn on the monitor first, then the computer. This sequence is very
important.
6 If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Note: ** Steps 2 and 3 are optional.
1 Attach the base.
2
Connect external speakers (optional).
3
Connect the power adaptor and power cord to the monitor, then to a
properly grounded AC outlet.
4
Turn the monitor on.
5
Configure your Wi-Fi settings.
6 If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.