User's Manual

Chapter 1. Getting to know your computer
5
 Using a micro Secure Digital (SD) card (not supplied)
Your computer supports micro Secure Digital (SD) cards.
Inserting a micro SD card
To insert a micro SD card:
1 Turn off the tablet, and disconnect the AC adapter and any cable(s) from the tablet.
2 Open the slot cover with your finger.
3 Insert the micro SD card until it clicks into place.
4 Close the slot cover.
Removing a micro SD card
To remove a micro SD card:
1 Turn off the tablet, and disconnect the AC adapter and any cable(s) from the tablet.
2 Open the slot cover with your finger.
3 Push the micro SD card in until you hear a click and then pull the micro SD card out.
4 Close the slot cover.
Notes:
• Insert only one card in the slot at a time.
• This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Note: Do not insert or remove the micro SD while the computer is turned on. Doing so may damage the
micro SD reader.
Note: Before removing the memory card, disable it by using the Windows safely remove hardware and
eject media utility to avoid data corruption.