How-To Guide

55
1 Turn off the computer, unplug the AC adapter (if connected) and
remove the battery pack. Then turn the computer over to access
its base.
2 Remove the screw (a) from the memory cover; then lift up and
remove the memory cover (b).
3 Insert the memory module diagonally into the slot (a), then gently
press it down (b) until it clicks into place.
4 Replace the memory cover and secure it with the screw.
The computer automatically detects and reconfigures the total
memory size.
TM100-e.book Page 55 Thursday, August 15, 2002 3:03 PM