User Manual

Advanced Settings options, you can define band priorities.

Changing the Settings for Adapter Switching

If you have two adapters installed, you can define the adapter to be used first. Adapter priorities can be set in

the Adapter Switching dialog.

To change the adapter switching settings:

1. From the General page, select the wireless adapter on the left side pane.

2. Click the Adapter Switching icon on the left side pane.

3. Click the Adapter Switching checkbox under the Settings heading.

4. Prioritize adapters in the lower adapter display list.

Select an adapter in the Adapter Type list and use the up/down arrows on the left side of the dialog

to arrange the adapters in priority. The adapter in the highest position is used first.

5. Click the adapter name that you want to use in the upper display list. The current adapter link status

displays next to the adapter name.

NOTE: One wireless adapter can be used for each band operating at a time.

6. After you have switched to the desired adapter, click OK to close the Adapter Switching dialog and

return to the General tab.

Back to Contents Page