Instruction Sheet

Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey

and AP Discovery (optional):

Some versions of this product do not support the Intel(R) PRO Network Connections menu

screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu

screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can

start the Administration Tools installer manually using Start > Run and browsing to the file

APAdmin.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product.

Skip Steps 21 and 22 below and continue with Step 23.

21. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters.

You can display this screen by removing and re-inserting the Intel CD, or by running

autorun.exe from the CD.

22. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools.

23. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration

Tools screen, click Next.

24. On the License Agreement screen, after reading the license agreement, select I accept

the terms in the license agreement and click Next.

25. On the Setup Type screen, verify that Typical is selected, then click Next.

26. On the Ready to Install the Program screen click Install.

27. After the software is installed on your computer, click Finish. Click Exit to close the

Intel(R) PRO Network Connections screen.

28. To launch the Wireless Administration Tools, follow the path Start > Programs > Intel(R)

PRO Wireless > Access Point Administration Tools and select AP Discovery or Site

Survey. For additional information on either program, press F1 or click Help while the

program is running.

Back to Contents

Installation under Windows 2000

Preliminary Notes

The installation instructions in this section are based on the following assumptions:

• The Intel(R) PRO/Wireless LAN Mini PCI Adapter hardware has already been installed in

the computer in accordance with the computer manufacturer's instructions.

• The computer has not been powered on since the hardware installation was completed.

• No other wireless LAN card is installed in this computer.

To install the driver before installing hardware, use Start > Run and browse to the file

SetupWLD.exe in the path PROW7100\WIN2K on the Intel CD. After running SetupWLD.exe,

shut down the computer and install the hardware. When the computer restarts, the driver will be

automatically installed.