Instruction Sheet

14. On the License Agreement screen, after reading the license agreement, select I accept

the terms in the license agreement and click Next.

15. On the Setup Type screen, verify that Typical is selected, then click Next. This is the

recommended setting for a first-time installation.

16. On the Ready to Install the Program screen click Install.

17. After the software is installed on your computer, click Finish. Click Exit to close the

Intel(R) PRO Network Connections screen or leave it open if you wish to install

Wireless Administration Tools.

18. To launch Intel PROSet, double-click the PROSet icon in the system tray or follow the

path Start > Programs > Intel Network Adapters > Intel(R) PROSet. For additional

information on the program, press F1 or click Help while the program is running.

During initial adapter installation and configuration, it may take up to two minutes for adapter

settings to be confirmed.

Administration Tools Installation (Optional)

Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey

and AP Discovery (optional):

Some versions of this product do not support the Intel(R) PRO Network Connections menu

screen for installation of the Administration Tools. If the Intel(R) PRO Network Connections menu

screen does not appear, or if it does not have a menu item for Wireless LAN Adapters, you can

start the Administration Tools installer manually using Start > Run and browsing to the file

APAdmin.msi in the path APPS/PROSet/2K-NET32 on the Intel CD supplied with the product.

Skip Steps 19 and 20 below and continue with Step 21.

19. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters.

This screen may have been launched in step 4 above. If the screen is not visible

when you close the Found New Hardware Wizard dialog, display it by removing and re-

inserting the Intel CD, or by running autorun.exe from the CD.

20. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools.

21. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration

Tools screen, click Next.

22. On the License Agreement screen, after reading the license agreement, select I accept

the terms in the license agreement and click Next.

23. On the Setup Type screen, verify that Typical is selected, then click Next.

24. On the Ready to Install the Program screen click Install.

25. After the software is installed on your computer, click Finish. Click Exit to close the

Intel(R) PRO Network Connections screen.

26. To launch the Wireless Administration Tools, follow the path Start > Programs > Intel(R)

PRO Wireless > Access Point Administration Tools and select AP Discovery or Site

Survey. For additional information on either program, press F1 or click Help while the

program is running.

Back to Contents