8 Usi ng GPS Navi gati on Setting up SP510 on your vehicle 8 Using GPS Navigation • • • • GPS antenna Unpacking the SP510 vehicle mount kit Setting up SP510 on your vehicle Using SP510 safely GPS antenna SP510 has an internal micro-antenna for the GPS (Global Positioning System) receiver. This antenna, located beneath the top left of the device, receives radio signals and process position information between the device receiver and the satellite signals.
8 Usi ng GPS Navi gati on GPS antenna • Install the vehicle mount on the surface of your vehicle that is reasonably flat and free of dirt and oil Device mounting precautions • • • • Some countries prohibit the mounting of any electronic device in any location on the vehicle dashboard. Be sure to check your local laws acceptable mounting areas before installing the auto mounting kit. Some newer vehicle models may have a heat reflective shield embedded in the windshield.
8 Usi ng GPS Navi gati on Setting up SP510 on your vehicle 3 Slide the device into the cradle. IMPORTANT: Before you start to use your device for GPS navigation, download the LTO (Long Term Orbits) first to update the Ephemeris data (current satellite position and timing information) onto your device. This data is needed to determine the GPS position of your current location.
8 Usi ng GPS Navi gati on Setting up SP510 on your vehicle For your first location fix, it is best to be outdoors under an open sky, with no tall buildings or other obstructions close by. It should take one to two minutes to compute the first position fix. After obtaining the first fix, Express GPS Connect operates at the optimum GPS performance level. If the data has expired, you should check your Express GPS Connect settings.
8 Usi ng GPS Navi gati on Using SP510 safely Once activated, Express GPS Connect icon on the Today screen turns from gray to blue . See “Express GPS Connect” on page 165 for more information on how to use Express GPS Connection, Using SP510 safely For your safety, observe the following precautions carefully. Driving precautions • • • • 144 Do not attempt to enter information or configure the device while driving.
8 Usi ng GPS Navi gati on Using SP510 safely 145
9 Usi ng SP510 C ompani on Pr ogr ams Phone management programs 9 Using SP510 Companion Programs • • • • Phone management programs Wireless communication programs Media-related programs Product download-related programs Phone management programs These programs help you manage the contents of your SIM card.
9 Usi ng SP510 C ompani on Pr ogr ams Phone management programs To copy a SIM contact to your device: > Settings 1 Tap 2 On the System tab, tap SIM Manager . . Wait for the SIM card contents to load. This may take a few seconds. 3 Tap and hold a SIM contact, then select Save To Contacts.
Usi ng SP510 C ompani on Pr ogr ams Phone management programs To export SIM text messages to the Inbox folder: • On the SIM Manager screen, tap Menu > Tools > Export All Messages to Inbox. To create a new SIM contact: 1 On the SIM Manager screen, tap New. 2 Enter the contact name and phone number. 3 Tap Add. Procedures on how to perform the various SIM Manager operations is integrated on “Chapter 7 Using Phone” on page 107.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs Wireless communication programs • • • • Internet Sharing Push to Talk Remote Desktop Mobile Express GPS Connect Internet Sharing Internet Sharing enables your computer to use the device as a modem for connecting to the Internet. To open Internet Sharing: > Programs > Internet Sharing . • Tap To use SP510 as a modem: 1 Connect your device to your computer using USB cable or a Bluetooth. > Programs > Internet Sharing .
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs Push to Talk NOTE: Push to Talk application is not available on all configurations. Push to Talk (PTT) is a walkie-talkie style service that provides simple communication with one person or with a group of people having compatible devices. With PTT, conversations are sent over cellular networks and only one person can talk at a time and then only by pressing the Push to Talk button.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs 2 Tap Yes. When activation is complete, notification prompt is displayed and the User Presence icon appears on the navigation bar. The PTT Menu window appears. The PTT Menu window includes the following menu commands or parameters: • PTT Contacts - Displays the PTT Contacts screen. • Add Contact - Lets you create an individual PTT contact. • Add Group - Lets you create a PTT group. • Set Your Name - Lets you create a PTT user name.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs To create an individual PTT contact: 1 Perform one of the following: • On the PTT Menu screen, tap PTT Contacts > Menu > Add Contact. 2 152 • On the PTT Menu screen, tap Add Contact. Enter the name and mobile number of your contact. -orOpen Contacts, then select a contact to add to PTT.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs 3 Tap ok. The newly added contact, Dave Mitchell, appears in the list next to the Invitation in progress icon . To rename a PTT contact: 1 Perform one of the following: • On the PTT Menu screen, tap PTT Contacts > a contact > Menu > Rename. 2 • Tap and hold a contact in the PTT Contact list, then tap Rename. Enter a new name for the contact, then tap ok. The number in the screen is read only and cannot be modified.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs 2 Enter a name for the new group and tap ok. Tap to create new PTT contacts. 3 Select a contact to add in the group, then tap ok. New group appears with the Inv itation in progress icon. To delete a PTT group: 1 On the PTT Contacts screen, select a group name. 2 Tap Menu > Delete Group. 3 Tap Yes. To rename a PTT group: 1 On the PTT Contacts screen, select a group name. 2 Tap Menu > Rename Group.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs PTT Contacts status icons The list below shows the status icons that appear next to the individuals in PTT Contacts. Icon Name Description Invitation in Progress Displays when you have sent an invitation to join a group or you are waiting for an individual to accept your invitation. Once a member accepts, this status will change to Available. Do Not Disturb Displays when a contact has changed their availability to Do Not Disturb.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs To receive an incoming PTT call: • If your status is Available, PTT calls are automatically accepted, a PTT call tone is played and then caller’s voice can be heard. • If your status is Silent/Vibrate, the phone vibrates prompting you to accept or reject the call. • If you receive a call while a call is in progress, a message box appears on the screen.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs Configuring the PTT Settings You can configure most features of the PTT to suit your preferences. You do this by accessing the Set Your Name, Auto Accept Off, or PTT is On commands in the PTT menu. To change your presence status: 1 Press the Push to Talk button. 2 Tap Menu > My Availability > turn it on or off. To auto accept invites: 1 On the PTT Menu screen, tap Auto Accept Off. 2 Tap Yes.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs To turn off PTT: 1 On the PTT Menu screen, tap PTT is On. 2 Tap Yes. Remote Desktop Mobile Remote Desktop Mobile is based on Terminal Services Technology. Use Remote Desktop Mobile to log onto a Windows Terminal Server type computer and use all of the programs that are available on that computer from your device. For example, instead of running Word Mobile, you can run the PC version of Microsoft Word and access all of the .
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs 6 Tap Connect. Once connected to the server, the computer’s screen may more than fill your device’s screen. If scroll bars are displayed on the server’s screen, you will see more than one set of scroll bars on your device—one to scroll information on the computer, and the other one to scroll the Remote Desktop Mobile screen. To ensure you are scrolling the PC window contents, use the five directional buttons at the bottom of the screen.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs Express GPS Connect SP510 is integrated with the latest GPS (Global Positioning System) technology to quickly compute positions in locations where GPS signals are barely detectable. Optimum GPS performance can be achieved with Express GPS Connect. This program operates by transferring GPS satellite data (ephemeris information) from the Internet to your device, where it is stored in memory.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs How to improve GPS performance Your SP510 computes your position faster and more accurately, provided the following are adhered to: • Always operate with current Express GPS Connect data. • Configure your SP510 to automatically update Express GPS Connect data. • Keep the SP510 away from other electronic devices that may emit radio waves (such as laptop computers and USB devices).
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs To download the satellite data file using Settings: > Settings 1 Tap 2 3 On the Connections tab, tap Express GPS Connect Tap Download Now. . . To download the satellite data file using the Express GPS Connect icon: 2 On the Today screen, tap the Express GPS Connect icon lower right corner of the screen. Tap Download Now. 3 Tap ok.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs Configuring the Express GPS Connect You can set preference settings on how to use Express GPS Connect. You can perform the following configuration options in Express GPS Connect: • Specify Express GPS Connect to obtain satellite data updates. • Specify Express GPS Connect to automatically update using a GPRS connection. • Specify Express GPS Connect to show expiration reminders and warnings.
9 Usi ng SP510 C ompani on Pr ogr ams Wireless communication programs 164 3 On the Express GPS Connect screen, tap the About tab. 4 Tap Advanced > Factory Reset. 5 Tap OK. This removes all of the Express GPS Connect internal operating information and restores the factory default settings.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs Media-related programs • • • Pictures & Videos Camera Camera Wedge Pictures & Videos Pictures & Videos extends your device’s function to the visual scene with its image management, viewer and editing functions. It supports BMP, GIF and JPEG image formats, as well as record and launch video clips stored on your device or on a storage card. Now you can keep those images of your favorite moments as mobile as you are.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs 5 Place the cursor on the My Pictures folder of the Mobile Device window, right-click, then click Paste. In Pictures & Videos, tap to view image files stored in the My Pictures folder. To copy image files from a storage card to your device: 1 Install the storage card to your device’s SD/MMC expansion slot. 2 Perform steps 1-4 of the procedure above. 3 Locate the Storage Card folder under the My Windows Mobile-Based Device directory.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs To perform image management tasks: It is only in thumbnail mode can you perform most of the image management tasks. 1 Tap and hold a thumbnail to display a pop-up menu of available actions. 2 Perform any of the following: • Tap Cut to move image file to the Storage Card folder. • Tap Copy to create a duplicate image file. This is useful when you want to edit an image but still want to retain an original copy of the image.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs To change the image orientation: You can change the display orientation of an image. • On the command bar, tap Menu > Edit > Rotate to rotate the image 90° counter-cl ock wis e. To crop part of an image: You have the option to specify a portion of an image and then save that portion as a new JPEG file. 1 Tap Menu > Edit. 2 Tap Menu > Crop to enable the Crop tool. 3 Drag your stylus across part of the image you want to crop.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs 6 Fill out the fields in the Save As screen. 7 Tap ok. To zoom in/zoom out the image: To view images in a larger or smaller scale use the Zoom tool. 1 Tap the image. 2 Tap Menu > Zoom. A zoom selection panel appears on the lower right corner of the screen. 3 Tap the Magnify button to enable the zoom selection tools. The full screen image zooms in and a red selection border automatically appears on the image inside the zoom selection panel.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs To set an image as a Today wallpaper: To add a custom look to the Today screen of your device; apply a wallpaper of your choice using any image. 1 Tap and hold a thumbnail, then tap Set as Today Background. 2 3 Tap the up or down arrows to set the transparency level. Tap ok. Slide show mode You can view images in a slide show much like viewing a PowerPoint presentation in your computer.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs • Tap to continue the slide show after pausing it. • Tap to pause the slide show. • Tap to display the previous image. • Tap to display the next image. • Tap to stop the slide show. Screen returns to thumbnail mode. Customizing Pictures & Videos Using the Options command you can set preference settings on how to use Pictures & Videos.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs • 4 Select the “Portrait pictures” or “Landscape pictures” radio button to set slide show orientation. Select the “Play a screensaver when connected to my PC and idle for 2 minutes” check box to set the image files in the My Pictures folder as a screensaver whenever your device is connected to the USB sync cable and is idle for 2 minutes.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs NOTE: The image capture application must be installed and enabled in order to operate the data capture. For more information on the type of image capture application compatible with your device, refer to the Wistron website. Camera With the Camera application you can take pictures and shoot videos, and modify settings with Camera while you are on mobile.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs To switch shooting mode from camera mode to video mode: 1 Launch Camera, by performing one of the following: 2 • Press the Camera button located on the lower-right side of the phone, to activate the camera. • Tap > Programs > Pictures & Videos > Camera . • Open Pictures & Videos, then tap Camera on the command bar. Tap Menu > Video. To switch back to camera mode, tap Menu > Still.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs 3 Press the Camera button to take the picture. To take photos using burst mode: Burst mode is a way to take a series of quick pictures. 1 Launch the Camera application. 2 Tap Menu > Mode > Burst. 3 Press the Camera button to take the picture. To stop a burst of pictures before all pictures have been taken, close Camera. To take photos using timer: Using the timer, you can take a self-portrait.
9 Usi ng SP510 C ompani on Pr ogr ams Media-related programs 3 Press the Camera button to begin recording. Recording stops when you press the Camera button again. To select video quality: You can specify the quality (video resolution and sound fidelity) and size of the video clips you record. Video clips of higher quality require more memory. 1 On the Camera screen, tap Menu > Video. 2 Tap Menu > Quality. 3 4 Select a video quality. Tap ok.
9 Usi ng SP510 C ompani on Pr ogr ams Product download-related programs 4 Tap ok. 1 Tap 2 Tap the picture or video clip that you want to see. To vi ew photos and video clips: > Programs > Pictures & Videos . To configure the camera settings of your device: 1 Launch the Camera application. 2 Tap Menu, then configure the device settings. • Video - Tap to switch to video or still (camera) mode.
10 C ustomi zi ng y our SP510 Adjusting system preferences 10 Customizing your SP510 • • Adjusting system preferences Program management Adjusting system preferences You can adjust the settings of your device to suit the way you work. Adjusting certain settings, such as backlight, auto power off timer, system volume, and processor speed, from the factory default settings may decrease your standby time. To access Settings: • Tap > Settings .
10 C ustomi zi ng y our SP510 Adjusting system preferences Buttons Assign the Send/End button on the stereo headset/single earbud headset to commonlyused programs. You can also adjust the on-screen scrolling speed here. Input Select an input method, options for word completion and other related settings. Lock Set a password to prevent unauthorized access to your device. You also have the option to set a password hint to serve as a reminder in case you forget your password.
10 C ustomi zi ng y our SP510 Adjusting system preferences Menus Customize what appears on the menu. Owner Information Enter personal information and customize text display when device is turned on.
10 C ustomi zi ng y our SP510 Adjusting system preferences Phone Set up the phone function of your device. See “Phone preferences” on page 135 for more information.
10 C ustomi zi ng y our SP510 Adjusting system preferences Sounds & Notifications Set the volume level for system sounds and select the types of action you want to hear sounds for. You can also define how you want to be notified about different events. Options for personalizing sound notifications are also available. Today Customize the look and the information that is displayed on the Today screen.
10 C ustomi zi ng y our SP510 Adjusting system preferences System tab About Displays your device’s version and copyright information; includes an option to define a device ID. Brightness Define settings for the display brightness and backlight control.
10 C ustomi zi ng y our SP510 Adjusting system preferences Certificates View and manage the public key certificates available on your device. Clock & Alarms Change the time or set alarms. Customer Feedback Submit your feedback on the Windows Mobile 6.0 software.
10 C ustomi zi ng y our SP510 Adjusting system preferences Encryption Enables or disables encrypting files stored in your memory card. Error reporting Enable or disable error reporting. External GPS Adjust the GPS settings.
10 C ustomi zi ng y our SP510 Adjusting system preferences Memory Adjust allocation of storage and main memory. Phone Profiles View and edit the Phone function’s preset profiles for different operations mode.
10 C ustomi zi ng y our SP510 Adjusting system preferences Power View power level for both the main and backup battery. To minimize power consumption, you can define settings for the auto-off function and the processor’s operation speed. Regional Settings Set default number and time display formats and other related options.
10 C ustomi zi ng y our SP510 Adjusting system preferences Remove Programs Remove programs from storage memory. Screen Set the viewing orientation and text size setting. You can also recalibrate screen and enable the ClearType feature.
10 C ustomi zi ng y our SP510 Adjusting system preferences SDSwitch Switch between SDIO and SDMMC driver mode. When you want to run applications from an Micro-SD card, it is recommended to switch the SD driver mode from the default SDIO mode to SDMMC mode to improve the performance of the Micro-SD cards. If you are not going to launch applications from an Micro-SD card, keep the default SD driver mode settings to SDIO mode.
10 C ustomi zi ng y our SP510 Adjusting system preferences System Information Displays your device’s hardware and software information. Windows Update Keep your device up to date by downloading security fixes, critical updates, drivers, and latest Help files.
10 C ustomi zi ng y our SP510 Adjusting system preferences Connections tab Beam Define settings for the beam function.
10 C ustomi zi ng y our SP510 Adjusting system preferences Bluetooth Use this option to configure the device’s Bluetooth settings. Connections Adjust settings for connecting to your ISP or to a local network. Express GPS Connect Enable and customize settings for the GPS connection utility.
10 C ustomi zi ng y our SP510 Adjusting system preferences USB to PC Enable or disable the enhanced network connectivity.
10 C ustomi zi ng y our SP510 Program management Wireless Manager Enable or disable the device's wireless radios and customize Bluetooth, and Phone settings. Program management Adding programs to your device Programs bundled with your device at the factory are stored in ROM (read-only memory). You cannot remove these programs, and you'll never accidentally lose ROM contents. ROM programs can be updated using special installation programs with a *.xip extension.
10 C ustomi zi ng y our SP510 Program management 4 Double-click the *.exe file. • If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your computer, the installer will automatically transfer the software to your device. • If the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer. You will need to move this file to your device.
10 C ustomi zi ng y our SP510 Program management To add a Start menu program using ActiveSync on your computer: 1 In the ActiveSync on your computer, click Explore to explore your device’s files and locate the program. 2 Right-click the program, and then click Create Shortcut. 3 Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu. For more information on using ActiveSync, see ActiveSync Help on your computer.
10 C ustomi zi ng y our SP510 SD driver management To remove a program using File Explorer on your device: If the program does not appear in the list of installed programs in Remove Programs, use File Explorer on your device to locate the program: 1 2 3 4 Tap > Programs > File Explorer . Tap the My Device icon (tap the folder list, labeled My Documents by default, and then My Device to see a list of all folders on your device). Open the path: Windows > Start Menu > Programs.
10 C ustomi zi ng y our SP510 SD driver management 5 Tap ok. A confirmation box is displayed. 6 Tap ok, then perform a soft reset. See “To perform a soft reset” on page 244 for more information. To set the SD drive mode to SDIO mode: 1 Tap > Settings . 198 2 On the System tab, tap SDSwitch 3 4 5 Select the SDIO Mode. Tap ok. A confirmation box is displayed. Tap ok, then perform a soft reset. See “To perform a soft reset” on page 244 for more information. .
10 C ustomi zi ng y our SP510 SD driver management 199
11 User Suppor t Protecting your SP510 11 User Support • • • Customer support Protecting your SP510 Troubleshooting Customer support Refer to following help resources on how to use your SP510. For information on: Operating instructions Refer to: This User Guide. It provides online reference for using your device. The guide is available for download. Visit http://support.wistron.com The SP510 Help. To view Help, tap Programs on your device > Help . See “Program list” on page 40 for more information.
11 User Suppor t Customer support Protecting your SP510 Your device is not just a financial investment but a wealthy source of personal information. It is then imperative that you protect your device from unauthorized access, as well as data loss. Using system locks There several ways that you can secure your SP510, both from accidental key presses and from unauthorized access.
11 User Suppor t Protecting your SP510 Locking the device You have the option to create a lock password that will be required to access your device after a set period of inactivity. To assign a lock password: > Settings 1 Tap 2 On the Personal tab, tap Lock . 3 On the Password tab, perform the following: . (a) 4 5 6 Select the “Prompt if device unused for” check box, then tap the pick list opposite it to set the period of inactivity before the lock password is required for access.
11 User Suppor t Protecting your SP510 4 Tap Menu > Edit > Copy. 5 Tap the My Device icon (tap the folder list, labeled My Documents by default, and then My Device to see a list of all folders on your device), then select Storage Card. 6 7 Tap Menu > Edit > Paste. After the backup process, remove the storage card from the SD/MMC expansion slot. To back up several files in a storage card: 1 Insert a storage card into the SD/MMC expansion slot on the top of your device.
11 User Suppor t Troubleshooting Troubleshooting Troubleshooting reminders When a troubleshooting procedure requires uninstalling the battery pack or resetting the device, note the following: • If the procedure requires uninstalling the battery pack, first turn the device off. Once it is off, wait for five seconds to allow the device to completely enter sleep mode before removing the battery pack.
11 User Suppor t Troubleshooting • • • A call is received by your device. • A preset alarm event is activ ated. Turns off sounds you don’t need. Your device emits sounds in response to a number of events, such as warnings, reminders, and screen taps or hardware button actions. Optimize battery life, by turning off any sounds you don’t need. > Settings (a) Tap (b) On the Personal tab, tap Sounds & Notifications . . (c) Clear the check boxes on both Sound and Notifications tabs.
11 User Suppor t Troubleshooting Finding space in program memory • Stop programs you are not currently using. In most cases, programs automatically stop to free needed memory. However, in some situations, such as when confirmation dialog boxes are waiting for a user response, the program may not be able to automatically stop. To check the state of your active programs: (a) (b) (c) • • Tap > Settings . On the System tab, tap Memory.
11 User Suppor t Troubleshooting IR connection problem Failure to beam information If you’re having difficulty transferring information via IR, try the following: • Transfer only one file or no more than 25 contact cards at a time. • • Align your device’s IR port with that of the receiving device so that they are unobstructed and within a close range. Adjust the room lighting. Some types of light interfere with IR connections. Try moving to a different location or turning off some lights.
11 User Suppor t Troubleshooting • You may need to change your device name if you are trying to connect to a network and cannot because another Pocket PC Phone with the same name is already connected. To change your device’s name: > Settings (a) Tap . (b) On the System tab, tap About . (c) On the Device ID tab, enter a new name on the Device name field. (d) Tap ok. Additional troubleshooting information is available in Connections Help of your device and on the ActiveSync Help on your computer.
11 User Suppor t Troubleshooting Resetting your SP510 You may have to perform a reset if the device freezes (i.e., device no longer responds to the buttons on the screen). To perform a soft reset: A soft reset allows your device to get a fresh start, similar to rebooting a computer. This restarts your device and adjusts memory allocation. All records and entries are retained after a soft reset. Unsaved data in open programs may in some cases be lost. 1 Remove the stylus from its holder.
11 User Suppor t Troubleshooting Checking the OS version of your device The SP510 operating system and software programs are stored in built-in Read Only Memory (ROM) chips. Data stored in the ROM are semi-permanent, it remains the same unless updated by a firmware updater. You may need to update the firmware of your device if new firmware patches are available. Visit the http://www.Wistron.com/SP510 for the latest firmware version available for SP510.
11 User Suppor t Troubleshooting Battery pack information CAUTION! DA NGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACE D. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS. This device is equipped with a removable and rechargeable Lithium polymer battery. When a replacement is needed, please request the dealer from whom your device was purchased to assist you. Use only manufacturer approved batteries.
Index A activate profile 133 ActiveSync 31 install 3 requirements 3 synchronize Calendar 65 synchronize Contacts 69 synchronize Tasks 71, 73 synchronize with server 35 add program 229 AirBEAM 187 Client 187 configuration Misc(1) tab 190 Misc(2) tab 191 Misc(3) tab 192 Misc(4) tab 193 Packages(1) tab 189 Packages(2) tab 189 Server tab 190 configure 188 package builder 187 synchronization with server 194 B back up 237 Bluetooth create partnership 46 send items 48 C Calendar 63 call history 130 call hold 120
E e-mail service 61 enter data 23 using block recognizer 25 using input panel 23 using keypad 23 enter PIN 109 Excel Mobile 81 create 82 Express GPS Connect 165 configure 168 F flight mode turn off 59 turn on 59 G GPRS connection 49 configure 49 GPS Navigation 145 GPS navigation 145 H hardware interface 12 keypad 14 SD/MMC expansion slot 12 soft buttons 14 stylus 12 touch screen backlight key 12 hardware tour 10 I Inbox 74 Index 247 infrared receive items 45 input panel 23 installing digital certificate
product download-related program 187 AirBEAM Smart 187 Certificate Import 211 MSP Agent 204 Rapid Deployment Client 195 PTT turn off 163 PTT Call History view 161 PTT calls 160 make call 160 receive call 161 PTT Contacts 160 add group 158 add individual 157 delete group 159 delete individual 158 leave group 159 rename 158 rename group 159 status icons 160 PTT servic e initialize 155 PTT Setti ngs auto accept invites 162 change presence status 162 Push to Talk 155 SIM Toolkit 153 speakerphone 114 storage ca
playback controls 92 playlist 87 wireless communication program 154 Express GPS Connect 165 Internet Sharing 154 Push to Talk 155 Remote Desktop Mobile 163 Word Mobile 78 create 79 file list 79, 81 215
Wistron, Corp. 21F, 88, Sec-1, Hsin-Tai-Wu Rd., Hsi-Chih, Taipei, 221, Taiwan, ROC +886-8691-2999 http://www.wistron.com All otherproduct or service names are the property of theirregisteredowners. © Wistron, Corp.
