User Manual

198
10 Customi zi ng y our SP 5 10
SD driver management
5 Tap ok. A confirmation box is displayed.
6 Tap ok, then perform a soft reset. See “To perform a soft reset” on page 244 for
more information.
To set the SD drive mode to SDIO mode:
1 Tap > Settings .
2 On the System tab, tap SDSwitch .
3 Select the SDIO Mode.
4 Tap ok. A confirmation box is displayed.
5 Tap ok, then perform a soft reset. See “To perform a soft reset” on page 244 for
more information.