User Manual

2 Sy stem Tour

Hardware interface

No. Component Description

21 Camera button Press to launch the Pictures & Videos program and

take pictures or capture bar code data.

Note: In SP510 configuration models with no camera

function, this button can be set to launch another

program. Tap Start > Settings > Personal >

Buttons to customize this button.

22 Battery release

latch

Unlocks the battery pack from the chassis.

Hardware interface

This section explains basic hardware procedures and describes the SP510 keypad and

function buttons.

Using the touch screen backlight key

Under some lighting conditions, viewing information on the LCD touch screen may be

difficult. If this is the case, activate the backlight by tapping the screen or by pressing the

Backlight key (not applicable when viewing the Today screen, the Dialer pad will instead

be displayed).

Using the stylus

On your device, the stylus replaces the mouse.

• Tap - Touch the screen once with the stylus to open items and select options.

• Drag - Hold the stylus on the screen and drag across the screen to select text and

images. Drag in a list to select multiple items.

• Tap and hold - Tap and hold the stylus on an item to see a list of actions available

for that item. In the pop-up menu that appears, tap the action you want to perform.

Using the SD/MMC expansion slot

Your device has an expansion slot compatible with a range of SD and MMC storage

cards, which are used to back up or transfer files and data or launching applications. The

slot also supports SDIO cards for added connectivity options.

IMPORTANT: If you are running an application from an Micro-SD card, make sure to

use

the SDSwitch application to set the driver mode of the expansion slot to support

SDMMC mode and enable the “No Remove On Resume” option. See “To set the SD

driver mode to SDMMC mode” on page 232 for instructions. Refer to "SDSwitch" on

page 224 for more information about the SDSwitch application.

To insert a storage card:

NOTE: This device comes with a protective plastic card in the card slot. Remove the

plastic card from the slot before trying to insert a storage card.