User Manual

5 Wir eless Commun ic ati ons

Getting connected

9 If required, enter the user name, password, and domain name.

If the mobile phone service provider specified the IP addresses of your DNS

servers, tap Advanced > Servers tab. Select Use specific server address, enter

the DNS addresses, then tap ok.

10 Tap Finish.

The connection is automatically started when you begin using a program that uses

an Internet connection.

To manually start the connection, perform one of the following:

• Repeat steps 1 and 2, then on the Tasks tab, tap Manage existing

connections under My ISP. Tap and hold a connection name, then

select Connect from the pop-up menu.

• Perform the “To connect to a wireless network” procedure on page 52.

Flight Mode

Flight Mode allows you to turn off all the active wireless connections for safe use on an

airplane.

To turn off wireless connections:

1 Press and hold the End button for five seconds.

2 Select Yes when the Turn On Flight Mode notification appears. All active wireless

connections are turned off.

When you want to turn the wireless connections back on, press and hold the End

button for five seconds. Select Yes when the Turn Off Flight Mode notification

appears. The device remembers which wireless connections were active prior to

entering Flight Mode and only turns on those wireless connections.

Connecting to your office network

You can connect to your office network by using a modem, virtual private network (VPN),

or wireless connection. Before you perform the procedure below, obtain the following

information from your network administrator or your wireless service provider.

• For a modem connection:

• ISP server phone number or access point

• User name and password

• For a VPN connection:

• User name, password, and domain name

• TCP/IP settings

• VPN server host name or IP address

• ISP server phone number or access point

If you will be using a modem or a VPN connection, perform the procedure in this section.

If you will be using a wireless connection, perform the “To connect to a wireless network”

procedure on page 52.