User Manual

12.
If the new PCI Express Mini Card has three connectors, skip this step. If the new PCI Express Mini Card has
two connectors, first insert the connector end of the white cable in the plastic cable bag and affix the cable to
the mainboard with tape.
13.
Align the contact edge of the new card with the corresponding socket contact of the computer.
14.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then press the
latch to hold it in place.
Make sure that the card is firmly fixed in the slot and does not move easily.
15.
Connect the cables to the new card.
Note:
If the new PCI Express Mini Card has two connectors, as in the next drawing, you must attach the
gray cable to the left connector and the black cable to the right connector.
16.
Replace the upper case and push down on the front and sides of the upper case.
5/6 ページInstalling and replacing the PCI Express Mini Card for wireless LAN connection
2006/09/11file://C:\WORK\Dali1_Tama\UPGRADE\replpci.htm