User Manual

9.
Push the upper edge of the palm rest downward slightly
(1)
, while lifting up the lower edge of the palm
rest and pulling the upper case towards you
(2)
to remove it from the lower case.
Note:
Pull up slightly to release the edges on the right side of the palm rest.
10.
If a tool for removing connectors is included in the package with the new card, use it to disconnect the
cables from the card
(1)
. If no such tool is included, disconnect the cables from the card
(1)
by picking
up the connectors with your fingers and gently unplugging them. Then peel off the antenna
(2)
.
Note:
Depending on the system configuration of your computer, the card may have only one
connector.
11.
Remove the screws
(
3
)
. The card pops up
(
4
)
. Remove the card
(
3
)
.
2/3 ページReplacing the PCI Express Mini Card for wireless WAN connection
2006/10/02mk:@MSITStore:C:\Documents%20and%20Settings\KNAKA\My%20Documents\DA...