User's Manual

MTB40S User Manual
4
LED INDICATION
The front led is a RGB indicator (red, green, blue) which shows the following status of the
transmitter:
- Wireless transmission status: green when RF transmission power is on (on power on the
device, this LED is
red and become green when the RF transmission power is on).
- Battery status:
green steady, slowly blinking (< 25%), quickly blinking (<12%).
- Modulation peek (if activated):
red.
- Limiter in action (if activated):
blue.
BATTERIES
MTB40S is working with 2 AA alkaline, NiMH or Lithium batteries (select correct type on setup
controls). Battery status can be checked on internal OLED display or looking to LED status on front.
BATTERY SUBSTITUTION
 Open transmitter cover and insert batteries.
Attention: always replace both the batteries
OPERATING CONTROL
❶
Shotgun Microphone input, XLR-3F socket (balanced)
❷
OLED display
❸
OFF button
❹
ON/SEL button
❺
DOWN button
❻
UP button
❼
LED indicator
❽
CH/GAIN button
❾
Battery compartment cover
❷
❶
❸
❹
❺
❻
❼
❽
❾