Operation Manual
EN - 11
Withings Home
v2.0 | August 2015
Setting Up Your Withings Home
Installing the Withings Home App
If the Withings Home app is not already installed on your device, perform the following
steps:
1. Type getapp.withings.com in your device’s web browser.
2. Tap Download on the App Store.
3. Tap GET.
The installation process starts.
When a new app version is available, you will be prompted to update it.
Plugging In Your Withings Home
The Withings Home is designed to be easily integrated into your home or ofce
environment. Before installing your Withings Home, make sure that you read our
recommendations in “Location” on page2.
1. Place your Withings Home in its nal location.
You can tilt your Withings Home using the magnetic table stand. This allows you
to vertically adjust the area that you want to monitor.
2. If you want to install your Withings Home with Ethernet, use a Cat-5 Ethernet cable to
connect it to your Wi-Fi router.
Installing your Withings Home in Ethernet can be useful to avoid interference problems.
3. Select the correct plug adapter from the travel adapter plug set.
4. Locate the top side of the plug adapter (labeled “TOP” on the adapter).
5. Locate the top side of the AC power supply (labeled “TOP” on the power supply).
6. Insert the tab located on the top side of the plug adapter in the notch located on the top
side of the AC power supply.
7. Push the plug adapter until you hear a click.
Make sure the adapter is properly inserted. If not, pull the button to disengage it and try
inserting it again.