Operation Manual

EN - 12
Withings Home
v2.0 | August 2015
8. Connect the power supply cable to your Withings Home’s micro USB port.
9. Plug the power supply cable to an outlet.
Your Withings Home displays a solid orange light for a few seconds and then switches
to a blinking blue light. It is now ready to be set up.
Note that there’s a plastic lm on the lens of your Withings Home. Make sure
you remove it before you start using it or it will impact the quality of the video.
Pairing Your Withings Home With Your Device
You need to pair your Withings Home with your device in order to install it. To do so, perform
the following steps:
1. Go to Settings > Bluetooth on your iOS device.
2. Enable Bluetooth.
Your device starts looking for all Bluetooth devices within range. This step can take up
to a minute.
3. Open the Withings Home app.
4. If your Withings Home is detected, a message appears on the screen of your device. Tap
the Withings Home you want to pair with your device.
5. Tap Next to pair it with your device.
Installing Your Withings Home
Creating a Withings ™ account
If you don’t already have a Withings ™ account, you have to create one in order to set up
and use your Withings Home. To do so, perform the following steps:
1. Open the Withings Home app.
2. Tap Join Withings.